Avaya XT Telepresence Deployment Manual page 72

Configuring the Avaya XT Telepresence
The position of the cameras is calibrated automatically.
b. Check that the cameras are vertically aligned, by checking that the table surface line
is continuous and not fractured on the image.
c. To fine tune the cameras manually, select Calibrate cameras manually.
Important:
In a typical installation you perform manual calibration of the auxiliary cameras
using the primary camera image for reference. We strongly recommend that you
do not calibrate the primary camera manually.
August 2020
Figure 52: Calibrating camera positions
Avaya Video Conferencing XT Telepresence Deployment Guide
Comments on this document? infodev@avaya.com
72