Avaya XT Telepresence Deployment Manual page 39

Enter numbers or characters.
Press and hold
to toggle Do not disturb
Press to change multi-image type.
Hold to toggle Open layout page.
Enter letters and digits into a field using the remote's keypad on the XT Remote Control Unit. The
system displays the current entry method to the right of the field. You can switch entry methods by
pressing the 1/a/A button repeatedly while the cursor is in the input field, to switch between abc1
(default) for lower case alphanumeric characters, ABC for upper case characters only (no digits),
abc for just lower case characters only (no digits), and 123 for digits only. To enter a letter or
number, press a key repeatedly to cycle through its characters.
August 2020
Hold to recall preset.
Open Contacts
Dial a call
Press to delete.
Hold to clear.
Toggle graphic
menu everywhere.
Volume
Press to toggle audio mute.
Hold to toggle privacy.
Change layouts
Press to select
far end
Press to select
near end
Figure 34: The XT Remote Control Unit (Advanced)
Avaya Video Conferencing XT Telepresence Deployment Guide
Comments on this document? infodev@avaya.com
Controlling the XT Series for the Avaya XT Telepresence
Standby or activate.
Press and hold to
switch off.
(Arrow keys)
Navigate menus.
Move camera.
Disconnect or
end a meeting
Long press to change input mode.
Back/undo.
Toggle graphic
menu on
home page.
Press red and green keys
to activate programming mode.
Enter two digits to program.
Zoom
Press to toggle video mute.
Hold to toggle Do not disturb.
Help
Press to change input source.
Hold to toggle local/remote.
Press Memo then enter
two digits to position
near camera as preset.
Press Select then enter
two digits to select
saved near or far preset.
Press to select a menu item.
Start/end
presentation
39