Choosing Monitors For Your Avaya Xt Telepresence; Related Links; Choosing A Telepresence Room - Avaya XT Telepresence Deployment Manual

Hide thumbs Also See for XT Telepresence:

Table of Contents

Room property

Requirement

Table sizes

The table height in either standard or dual-row setup should be 71-75cm, ideally 72cm, with

a matte surface finish. The lower edge of the monitor screens (not frames) should be aligned

with the height of the tables.

For a standard room layout, use a single rectangular table to seat six participants across the

room's depth. For a dual-row telepresence room, use three tables in the front row for six

participants (70 x 160cm) and three tables in the back row for 12 participants (70 x 290cm).

Ensure that the back row tables are built so they do not expose participants' legs.

For information on the position of tables in the room, see

Telepresence Room Setup

Room

Choosing Monitors for Your Avaya XT Telepresence

Choose the monitors (purchased separately) to match your telepresence room dimensions and

provide the image quality that you need.

There are two types of monitors deployed in the Avaya XT Telepresence: monitors that are used

to show meeting participants (main monitors) and a single monitor that is used for displaying

presentations (presentation monitor).

In a standard room layout, the size of the main monitors depends on the size of the telepresence

room, so choose monitors only after you have chosen the room (see

Room

on page 9). All three main monitors must be the same size and model to provide image

consistency.

August 2020

Figure 6: Table dimensions in a dual-row setup

on page 29 or

on page 30.

on page 9

Avaya Video Conferencing XT Telepresence Deployment Guide

Comments on this document? infodev@avaya.com

Placing the Table in a Standard

Placing the Tables in a Dual-Row Telepresence

Choosing a Telepresence

Table of Contents