Avaya XT Telepresence Deployment Manual page 19

b. Insert two stabilizers into each mounting bracket, rotating them into place.
c. Carefully position the support plate over the Primary monitor so that its front lip covers
the top of the monitor, but continue holding it in position.
Figure 13: Resting the support plate on the Primary monitor and extending stabilizers
d. Rotate the stabilizers until they push firmly at the rear of the monitor. The front lip of
the supporting plate counter-presses the top part of the monitor, holding the
construction securely in place.
e. When the bracket is positioned correctly, secure it in place by rotating the nuts at the
rear of the stabilizers conter-clockwise until firmly in place.
August 2020
Figure 12: Adding stabilizers to the mounting bracket
Avaya Video Conferencing XT Telepresence Deployment Guide
Comments on this document? infodev@avaya.com
Placing Components of Your Avaya XT Telepresence
19