Table of Contents
Advertisement
Configuring the Avaya XT Telepresence
If there are image areas that appear on two screens, set the Pan/Tilt step to 1 or 2,
and then select the Left or Right buttons to position the camera horizontally.
j. Repeat the manual calibration for the camera providing the left image.
k. Select Next, and then select Yes to apply these settings. The camera position is
saved by the XT Codec Unit.
l. If it is still necessary to adjust the camera position, you can also slightly change the
slope of the camera bracket. Typically, it is not necessary.
17. Calibrate the color of the camera image to the lighting conditions of your telepresence
room.
a. Select Calibrate cameras automatically.
The automatic colorimetric calibration is performed.
August 2020
Figure 54: Example of incorrect pan calibration
Avaya Video Conferencing XT Telepresence Deployment Guide
Comments on this document? infodev@avaya.com
74
Advertisement
Table of Contents
