Avaya XT Telepresence Deployment Manual page 11

Hide thumbs Also See for XT Telepresence:

Table of Contents

Room property

Requirement

Wall colors

Choose a matte or flat wall paint to avoid light reflection.

Ensure the background wall is in a neutral gray color, ideally PANTONE 422U. Alternatively,

for large rooms, you can cover the background wall with a panel sized 1.4m x 8m,

positioned 30cm from the floor, colored in a neutral shade.

Electrical cabling

Ensure the cabling supports at least 2640W.

Power sockets

Install nine sockets (100-240V AC2,5A) close to the monitors, and six sockets under the

table.

Computer

For presentations, ensure the DVI socket on the XT Codec Unit is connected to a DVI/VGA

connection

cable, where the VGA connector is available to any participant in the room. Consider using a

VGA splitter to distribute VGA connectors if required.

August 2020

Figure 4: Background panel in dual-row room

Avaya Video Conferencing XT Telepresence Deployment Guide

Comments on this document? infodev@avaya.com

Choosing a Telepresence Room

Table continues...

Table of Contents