Avaya XT Telepresence Deployment Manual page 58

Configuring the Avaya XT Telepresence
2. Set the date and time, as described in
page 58.
If you set Internet time to Yes, you cannot modify the date and time fields.
Table 8: Configuring date and time settings
Field Name
Day, Month, Year,
Time Format, Hour,
Minutes
Internet time
Use Default NTP
Servers, Server 1,
Server 2
Refresh time (min)
3. From the web interface only, select Save.
Related links
Configuring Basic Settings with the Quick Setup Wizard
August 2020
Figure 42: Date and Time
Description
Enter the date, time format, and time.
Select Yes to synchronize the system clock with the network clock, thus
allowing you to align devices connected to the Internet using Network
Time Protocol (NTP).
If your organization uses an external Simple Network Time Protocol
(SNTP) server for synchronizing the system clock, select Yes. The XT
Series uses SNTP servers returned by Dynamic Host Configuration
Protocol (DHCP), if available. If not available, it uses a list of well-known
public servers on the Internet.
If your organization uses one or two internal NTP servers for that
purpose, select No and enter the server IP address in fields Server 1
and/or Server 2.
Enter the time period after which the system contacts the NTP server to
refresh the clock. (10...1000 minutes)
Avaya Video Conferencing XT Telepresence Deployment Guide
Comments on this document? infodev@avaya.com
Table 8: Configuring date and time settings
on page 50
on
58