Table of Contents
Advertisement
Placing Components of Your Avaya XT Telepresence
Figure 9: Positioning the wall mount plate
The wall mount has three holes to fix it to the wall.
b. Attach the plate to the wall with three screws.
You may need to first mark the position of each hole on the wall with a pencil to drill
holes depending on your environment.
c. Slide the support plate onto the rails of the wall mount plate as shown
Figure 10:
Sliding the supporting plate onto the wall mount plate
on page 18.
August 2020
Avaya Video Conferencing XT Telepresence Deployment Guide
17
Comments on this document? infodev@avaya.com
Advertisement
Table of Contents
