Avaya XT Telepresence Deployment Manual page 22

Hide thumbs Also See for XT Telepresence:

Table of Contents

Setting up the Telepresence Room

6. Replace each of the supporting plates (and cameras) on to the platform using the four

fixing screws you set aside earlier for each supporting plate.

7. Mark cameras using sticky labels you prepared.

8. Connect cameras to their respective XT Codec Units. For example, connect Auxiliary-L

camera to Auxiliary-L XT Codec Unit:

a. Insert the following connectors on the camera cable to the ports on the back of the

camera:

• The DVI connector to the DVI socket

• The 8-pin connector to the IN (RS232C) socket

• The power connector to the DC IN 12V socket

August 2020

Figure 17: Attaching the camera to the supporting plate

Avaya Video Conferencing XT Telepresence Deployment Guide

Comments on this document? infodev@avaya.com

Table of Contents