Avaya XT Telepresence Deployment Manual page 82

Configuring the Avaya XT Telepresence
Before you begin
Access the Avaya XT Telepresence web interface on the master endpoint.
Procedure
1. From the XT Series web interface, select Make your Call > Contacts > New Favorite.
2. Configure the settings as described in
3. Click Save and go back.
4. Click Edit next to the new favorite entry that you just added.
5. Change the Contact Type from Person/Room to Meeting Call.
6. Click Save.
7. Click Edit > Edit next to the default number.
8. Change the label from Office to Slave 1. Alternatively, you can type any name that refers to
the lefthand device from
Figure 63: Triplet with two slaves and master
9. Click Save.
10. Click New Number and add a number for the master device (the righthand device from
Figure 62: Duplet with single slave and master
63: Triplet with two slaves and master
11. Click Save.
12. (Optional) If the remote telepresence instance is a triplet, click New Number again and
add a number for slave 2 (the righthand device from
master on page 81)
13. (Optional) Click Save.
Related links
Direct calls between two telepresence instances
New Favorite field descriptions
New Favorite field descriptions
Name
Name
Number
Group
Related links
Configuring direct calls between two telepresence instances
August 2020
Figure 62: Duplet with single slave and master
on page 82
Avaya Video Conferencing XT Telepresence Deployment Guide
Comments on this document? infodev@avaya.com
New Favorite field descriptions
on page 81).
on page 81 or the center device from
on page 81).
Figure 63: Triplet with two slaves and
on page 80
Description
The title of the telepresence instance. For example,
TP_Rome or TP_London.
The number associated with the telepresence
instance. This can be an IP address or E.164/SIP
alias. This should be the first number of the
telepresence instance (Slave 1).
You can leave this field as blank.
on page 81
on page 82.
on page 81 (or
Figure
82