Avaya XT Telepresence Deployment Manual page 52

Configuring the Avaya XT Telepresence
• Mozilla Firefox version 3.6 or later
• Apple Safari version 5 or later
• Opera version 11 or later
• Microsoft Edge 38 or later (EdgeHTML v14)
If you have a monitor, you can find the IP address at the top bar of the endpoint's monitor.
Before you begin
Web access is enabled by default. If it was disabled, you can enable it and configure the security
details as described in Deployment Guide for Avaya Room System XT Series.
Procedure
1. Open any of the supported internet browsers and access the XT Series login page by
entering the system's IP address, like http://1.2.3.4/.
2. Enter the username and password.
The default username for the web interface is Admin with the password 1234.
Important:
We recommend changing the default credentials after logging in for the first time, as
described in the Deployment Guide for Avaya Room System XT Series.
3. (Optional) Select the web interface language from the Language list.
4. Select Login.
Related links
Controlling the XT Series for the Avaya XT Telepresence
Configuring Basic Settings with the Quick Setup Wizard
August 2020
Figure 41: Logging into the XT Series web interface
Avaya Video Conferencing XT Telepresence Deployment Guide
Comments on this document? infodev@avaya.com
on page 36
on page 50
52