Table of Contents
Advertisement
4 Banner 3D Configuration Workspace
The Banner 3D Configuration software displays the information needed to modify sensor parameters.
1
The workspace is divided into several panes.
1. Image Pane Parameters—Includes zoom; x, y, z coordinates; image color; view selection (Amplitude, Z(mm), Points,
Surface). The options vary depending on the selected view. See
2. Image pane—Displays the current image captured by the sensor and includes the buttons:
•
Load Image—Loads a previously saved file for viewing while disconnected from the sensor
•
Save Image—Save file as a .t3f
•
Trigger—Manually triggers the sensor when Trigger mode is set to External or Software
3. Connection pane—Enables connection to a sensor and includes settings and information related to the sensor's IP
address. See
Connection Pane
4. Sensor Controls pane—Controls the trigger mode and illumination output. See
5. Fill Level pane— Includes options for the region of interest and sensor controls, as well as live fill and peak height
data. See
Fill Level Pane
6. Communications pane—Sets the communication protocol and DHCP option for the sensor. See
Pane
on page 17.
7. Sensor Maintenance pane—Includes sensor information and options to update the firmware, restore the sensor to
the default settings, to backup the current sensor settings, or restore the sensor to previously saved settings. See
Sensor Maintenance Pane
4.1 Image Pane Parameters
Use the Image Pane Parameters to change how the Image pane displays.
Click a view selection button to change the view and the available options:
Amplitude
Shows a top down 2D pseudo-grayscale image of the container.
Z(mm)
Shows a top down 2D color-coded Cartesian Z image of the container.
Points
Shows the individual measurement points in 3D.
Surface
Shows a smoothed out view of the measurement points in 3D.
Figure 10. Banner 3D Configuration Software
2
on page 13.
on page 15.
on page 18.
Figure 11. Image Pane Parameters
www.bannerengineering.com - Tel: + 1 888 373 6767
ZMX Series 3D Time of Flight Sensor
3
4
5
6
7
Image Pane Parameters
on page 11.
Sensor Controls Pane
on page 13.
Communications
11
Advertisement
Table of Contents
