Advertisement
Quick Links
WORLD-BEAM
Instruction Manual
Miniature Self-Contained Photoelectric Sensors in Universal Housing
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or
death. This device does not include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized
sensor output condition.
Models
Model 1
QS186EV (624 nm Visible red)
QS186E (940 nm Infrared)
QS18VN6R
QS18VP6R
QS186EB (940 nm Infrared)
QS18VN6RB
QS18VP6RB
Model 1
QS18VN6LP
QS18VP6LP
1
•
To order the 9 m (30 ft) PVC cable model, add the suffix "W/30" to the cabled model number. For example, QS186E W/30.
•
To order the 4-pin M12/Euro-style integral quick disconnect model, add the suffix "Q8" to the model number. For example, QS186EQ8.
•
To order the 4-pin M8/Pico-style integral quick disconnect model, add the suffix "Q7" to the model number. For example, QS186EQ7.
•
To order the 150 mm (6 in) PVC cable model with a 4-pin M12/Euro-style quick disconnect, add the suffix "Q5" to the model number. For
example, QS186EQ5.
•
To order the 150 mm (6 in) PVC cable model with a 4-pin M8/Pico-style quick disconnect, add the suffix "Q" to the model number. For example,
QS186EQ.
•
Models with a quick disconnect require a mating cordset.
Original Document
197052 Rev. F
QS18 Series Sensor
®
•
Easily fits (or retrofits) almost any mounting situation
•
Exceptional optical performance, comparable to larger "MINI-style" or barrel sensors
•
10 V dc to 30 V dc operation, with complementary (SPDT) NPN or PNP outputs, depending
on model
•
Bright LED operating status indicators are visible from 360°
•
Rugged sealed housing, protected circuitry
•
Models available with or without 18 mm threaded "nose"
•
Less than 1 millisecond output response for excellent sensing repeatability
•
Choose 2 m (6.5 ft) or 9 m (30 ft) cable or 150 mm (6 inch) Pico-style cabled QD
Opposed Mode
Effective beam: 13 mm (0.5 inch)
OPPOSED
Effective beam: 13 mm (0.5 inch)
OPPOSED
Polarized Retroreflective Mode
630 nm Visible red
P
POLAR RETRO
29 September 2020
20 m (66 ft)
OPPOSED
3.5 m (12 ft)
Range
Output
—
—
NPN
PNP
—
NPN
3 m (10 ft)
PNP
Range
Output
NPN
PNP
197052
Advertisement
Related Manuals for Banner WORLD-BEAM QS18 Series
Summary of Contents for Banner WORLD-BEAM QS18 Series
- Page 1 WORLD-BEAM QS18 Series Sensor ® Instruction Manual Miniature Self-Contained Photoelectric Sensors in Universal Housing • Easily fits (or retrofits) almost any mounting situation • Exceptional optical performance, comparable to larger “MINI-style” or barrel sensors • 10 V dc to 30 V dc operation, with complementary (SPDT) NPN or PNP outputs, depending on model •...
- Page 2 ® WORLD-BEAM QS18 Series Sensor Model 1 Retroreflective Mode Range Output QS18VN6LV 628 nm Visible red 6.5 m (21 ft) QS18VP6LV RETRO Model 1 Convergent Mode Range Output QS18VN6CV15 630 nm Visible red 16 mm (0.63 in) QS18VP6CV15 QS18VN6CV45 43 mm (1.7 in) QS18VP6CV45 CONVERGENT VISIBLE RED...
-
Page 3: Wiring Diagrams
Unterminated plastic fibers are designed to be cut by the user to the length required for the application. To facilitate cutting, a Banner model PFC-1 cutting device is supplied with the fiber. Cut the fiber as follows: Lift to Open Ports Use small ports for fiber sizes: •... -
Page 4: Specifications
® WORLD-BEAM QS18 Series Sensor Installing Plastic Fibers QS18V..6FP Follow these steps to install the plastic fibers. Fiber end Adapter Adapter Installation Figure 2. Installing Plastic Fibers 1. Slide the fiber gripper up to unlock it (A). 2. If using 0.25 mm or 0.5 mm core fibers, slide the plastic fiber adapters onto the fibers, flush with the fiber ends. 3. - Page 5 ® WORLD-BEAM QS18 Series Sensor Certifications Construction ABS housing 3 mm mounting hardware included Connections 2 m (6.5 ft) 4-wire PVC cable; 9 m (30 ft) 4-wire PVC cable; 4-pin M8/Pico- style or M12/Euro-style QD; or 150 mm (6 in) cable with a 4-pin M8/Pico- style or M12/Euro-style QD, depending on model Required Overcurrent Protection Environmental...
-
Page 6: Performance Curves
® WORLD-BEAM QS18 Series Sensor Model Suffix Q Model Suffix Q5 Model Suffix Q7 Model Suffix Q8 (e.g. QS186EQ) (e.g. QS186EQ5) (e.g. QS186EQ7) (e.g. QS186EQ8) 41.5 mm 49 mm (1.63") (1.93") 150 mm (6") Euro-Style Integral 150 mm (6") Integral 4-pin Pico-Style 4-pin... - Page 7 ® WORLD-BEAM QS18 Series Sensor Convergent (Performance is based on a 90% reflectance white test card.) Excess Gain Curve Beam Pattern Excess Gain Curve Beam Pattern 1000 1000 QS18...CV15 QS18...CV45 6 mm .24 in 6 mm .24 in QS18...CV15 QS18...CV45 Convergent Mode Convergent Mode 4 mm...
- Page 8 ® WORLD-BEAM QS18 Series Sensor Fixed Field Excess Gain Curve (50 mm) Excess Gain Curve (100 mm) Excess Gain Curve (150 mm) Spot Sizes 50 mm Models: 1000 1000 1000 QS18..FF100 QS18..FF150 QS18..FF50 At 25 mm: 8 × 5.5 mm At 50 mm: 6 ×...
- Page 9 ® WORLD-BEAM QS18 Series Sensor 4-Pin Threaded M12/Euro-Style Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC-406RA 2 m (6.56 ft) 32 Typ. [1.26"] MQDC-415RA 5 m (16.4 ft) MQDC-430RA 9 m (29.5 ft) 30 Typ. Right-Angle [1.18"] MQDC-450RA 15 m (49.2 ft) M12 x 1 ø...
-
Page 10: Fcc Part 15 And Can Ices-3 (B)/Nmb-3(B)
Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.