Indications; Mechanical Position Indicator - AUMA SG Series Operation Instructions Manual

SG 04.2 SG 10.2
with actuator controls MEC 03.1
10.

Indications

10.1.

Mechanical position indicator

Figure 34: Mechanical position indicator
The mechanical position indicator shows by means of a white rotating pointer both
the valve position and whether the actuator is running (running indication). If set
correctly, the position indicator shows that end position OPEN or CLOSE has been
reached.
Perform the position indicator setting to match the valve!
Refer to page 26, Mechanical position indicator: set
Table 13: Valve position setting with regard to the pipeline.
White pointer
Position with regard to the pipeline
Description
The valve is closed.
The actuator is in end position CLOSED.
The valve is open.
The actuator is in end position OPEN.
Valve and actuator are in an intermediate position.
Indications
37