AUMA SG Series Operation Instructions Manual page 8

Name plate
Type designation
Order number
Serial number
Actuator
Data Matrix code
8
Actuator controls name plate
Figure 4: Name plate for actuator controls (example)
[1] Type designation
[2] Order number
[3] Serial number
[4] Mains voltage, mains frequency
[5] Operating time per stroke
[6] Enclosure protection
[7] Can be assigned as an option upon customer request
[8] Data Matrix code
Descriptions referring to name plate indications
Figure 5: Type designation (example)
1. Type and size of actuator
2. Flange size
These instructions apply to the following device types and sizes:
Part-turn actuators for open-close and modulating duty: SG 04.2, 05.2, 07.2, 10.2
The product can be identified using this number and the technical data as well as
order-related data pertaining to the device can be requested.
Please always state this number for any product inquiries.
On the Internet at http://www.auma.com > Service & Support > myAUMA, we offer
a service allowing authorised users to download order-related documents such as
wiring diagrams and technical data (both in German and English), inspection certificate
and the operation instructions when entering the order number.
Table 1:
Description of serial number (example of 0520NS12345)
05 20 NS12345
05 Positions 1+2: Assembly in week = week 05
20 Positions 3+4: Year of manufacture = 2020
NS12345 Internal number for unambiguous product identification
When registered as authorised user, you may use our AUMA Assistant App to scan
the Data Matrix code and directly access the order-related product documents without
having to enter order number or serial number.
Figure 6: Link to AUMA Assistant App:
For further Service & Support, software/apps/... refer to www.auma.com.
SG 04.2 SG 10.2
with actuator controls MEC 03.1