Huawei FusionModule5000 Maintenance Manual page 75

FusionModule5000 Smart Modular Data Center
Maintenance Guide (ECC800)
Alar
m
ID
(Ala
rm
ID-
Cau
se
ID)
0335
0594
-1
0095
-1
0096
-1
Issue 01 (2019-03-05)
Alarm Sever System Action
Name ity
battery al
circuit
breaker
is OFF.
Genera Warni None.
tor ng
connec
ted
Insuffi Minor This alarm does not
cient trigger any action.
redund
ant
racks
Insuffi. Minor This alarm does not
redund trigger any action.
ancy
1. The system
ECO Minor
cannot transfer
volt.
to ECO bypass
abnorm
mode.
al
2. If the system
works in ECO
bypass mode, it
transfers to
inverter or
bypass mode or
stops output.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Cause Solution
circuit breaker is displayed. See
OFF. details about how to
handle other alarms.
Generator Running status
connected displayed. No
suggested measures.
1. Reduce the load.
 The load is
excessive. 2. Decrease the

The
configured
number of
redundant
racks is
incorrect.
1. Reduce the load.

The load is
excessive. 2. Decrease the

The
configured
number of
redundant
modules is
incorrect.
1. Check the
 The ECO
bypass voltage
or frequency is
out of the
preset range. 2. Check that the
 The ECO
bypass voltage
or frequency
range is
incorrectly set.

The bypass
input sequence
3. Check that the
is reverse or
the neutral
wire is
disconnected.
3 Alarm Reference
configured
number of
redundant racks.
configured
number of
redundant
modules.
bypass input
voltage and
frequency.
rated voltage,
rated frequency,
ECO bypass
voltage range,
and frequency
range are
correctly set.
bypass power
cable or circuit
breaker is
connected.
67