Huawei FusionModule5000 Maintenance Manual page 69

FusionModule5000 Smart Modular Data Center
Maintenance Guide (ECC800)
Alar
m
ID
(Ala
rm
ID-
Cau
se
ID)
0036
-2
0037
-1
0040
-7
Issue 01 (2019-03-05)
Alarm Sever System Action
Name ity
on addition, the
discharger
cannot be
started. If the
mains is
abnormal, the
system will
transfer to
bypass mode or
shut down
based on logic.
Battery Warni None.
mainte ng
nance
remind
er
Battery Critic The system exits
underv al from battery mode
oltage and transfers to a
working mode
based on logic.
1. The system
Rectifi Critic
shuts down the
er al
module.
abnorm
al 2. If only one
module is
working, or the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Cause Solution
threshold.
 The
configured
3. Check that the
number of
batteries is
less than the
actual number.

The actual
number of
batteries does
not meet
requirements.
The time for Maintain the
maintenance batteries.
arrives.
1. Check whether
 The UPS
works long in
battery mode.
 The charger is
2. Check whether
faulty.
3. Check whether
4. Check whether
1. Check that the

The fan for the
power module
is abnormal.

The air
channel of the
2. Check whether
power module
3 Alarm Reference
batteries
matches the
actual number.
actual number of
batteries meets
requirements.
the battery
voltage is
normal.
the output is
overloaded.
any battery is
damaged. If yes,
replace the
battery.
any battery
charger
generates an
alarm. If yes,
replace the
faulty module.
air channel for
the module is
free from
blockage.
61