Huawei FusionModule5000 Maintenance Manual page 196

FusionModule5000 Smart Modular Data Center
Maintenance Guide (ECC800)

Procedure
1.
2.
3.
4.
Issue 01 (2019-03-05)
Material: a new undamaged and undeformed camera of the appropriate model
Unscrew and remove the front cover from the camera.
Figure 5-88 Removing the front cover from a camera
Remove the screws from the camera.
Figure 5-89 Removing a camera
Remove the monitoring network cable from the camera and remove the camera.
Install the new camera by following the instructions about camera installation in the
ECC800 Data Center Controller User Manual. Configure the camera parameters by
following the instructions about camera commissioning in the ECC800 Data Center
Controller User Manual.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
188