Huawei FusionModule5000 Maintenance Manual page 49

FusionModule5000 Smart Modular Data Center
Maintenance Guide (ECC800)
Maintenance
Item
Check the
availability of
the access
actuator.
Issue 01 (2019-03-05)
Maintenance Operation
Period
Semi-annually On the WebUI
of the ECC800,
choose
Monitoring >
Aisle > Access
Actuator
Group >
Access
Actuator to
enter the
Controls page,
and remotely
control the
doors.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Routine Maintenance
Standard Troubleshooti
ng
abnormal. If gateway is
the RUN not
indicator energized. If
blinks so,
slowly, the reconnect
access the cable. If
actuator is not, replace
running the access
normally. If actuator.
the RUN

If the RUN
indicator
indicator
blinks at
blinks at
short
short
intervals, the
intervals,
communicat
check
ion is
whether the
interrupted.
communicat
 The ALM ions cable is
indicator is properly
off. connected.
If not,
reconnect
the cable. If
so, replace
the cable.

If the ALM
indicator is
steady on,
clear the
alarm by
referring to
ECC800
Alarm
Reference
V100R001.
The smart If the smart
module aisle module aisle
doors can be doors cannot be
normally normally
controlled controlled,
through the check whether
access actuator. the magnetic
lock cable is
loose or
disconnected. If
so, reconnect
the cable. If not,
replace the
access actuator
or magnetic
41