Huawei FusionModule5000 Maintenance Manual page 138

FusionModule5000 Smart Modular Data Center
Maintenance Guide (ECC800)
Figure 5-32 Removing the electric control box
Step 3 Remove all cables from the side panel of the electric control box, as shown by (3) in
5-32.
Step 4 Remove the four screws that secure the electric control box to the support, as shown by (4) in
Figure
Step 5 Pull the handle on the side panel of the electric control box to remove the box, as shown by (5)
in Figure
box is heavy.
Step 6 Remove the three screws from the cover of the electric control box, as shown by (6) in
5-29.
Issue 01 (2019-03-05)
5-29.
5-29. Place it horizontal on the floor. Exercise caution because the electric control
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
Figure
Figure
130