FusionModule5000 Smart Modular Data Center
Maintenance Guide (ECC800)
2.
3.
Step 5 Install a new water valve actuator.
1.
Issue 01 (2019-03-05)
Figure 5-41 Removing the actuator of the chilled water valve
Insert the hex key on the handle into the hole in the front of the actuator, as shown by (2)
in
Figure
5-41.
Turn the handle in the direction shown by (3) in
remove the actuator.
Use an actuator handle to remove the locating pin from the hole in the new actuator
mounting kit, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-41
Figure
5-42.
5 Parts Replacement
to loosen the screw and
145