Huawei FusionModule5000 Maintenance Manual page 140

FusionModule5000 Smart Modular Data Center
Maintenance Guide (ECC800)
Step 3 Remove the air filters.
Step 4 Remove the condensate pump, as shown in
Figure 5-33 Removing condensate pump components
1.
2.
3.
4.
Pre-heat the forcible condensate drainpipe to facilitate removal.
5.
Step 5 Install a new condensate pump and connect cables in a reverse order of
Issue 01 (2019-03-05)
Remove the two screws from the cover of the condensate pump using a Phillips
screwdriver and take off the cover.
Use a Phillips screwdriver to remove the four screws that secure the condensate pump.
Remove the control cables from the condensate pump.
Remove the forcible consulate drainpipe.
Take off the condensate pump.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-33.
5 Parts Replacement
Step 4.1 to Step 4.4.
132