Emergency Brake Assistance System (Front Assist) - Seat Tarraco 2020 Owner's Manual

Operating the speed limiter with
the third lever
On the left of the steering column:
Fig. 255
buttons to operate the speed limiter.
Connecting
Move the lever towards the steering wheel
●
to position .

The last programmed speed is stored. It does
not take effect yet.
Activating the speed limiter
While driving, press button
●

.
1
The current speed is stored as the maximum
speed.
Setting the programmed speed
The programmed speed can be set:
Driver assistance systems
Move the lever to the pressure point
●
to increase speed in small increments of 1
km/h (1 mph).
Move the lever upwards
●
increments of 10 km/h (5 mph).
Press the button
●
duce speed in small increments of 1 km/h (1
mph).
Move the lever downwards
●
in increments of 10 km/h (5 mph).
To change the programmed speed without
interruption, keep the lever pressed in the di-
rection

limited to the set value.
Switching off the speed limiter
Move the lever to position
●
The system switches off.
Switching off temporarily
If you want to temporarily deactivate the
speed limiter, e.g. for overtaking, move the
›››
Fig. 255
lever to the pressure point
›››
ton Fig. 255
After overtaking, the speed limiter can be ac-
tivated with the previously programmed
speed by moving the lever to the pressure
point .


to increase in

›››
Fig. 255 to re-
 1
to reduce

or . The speed is
+  -
.

or press but-

.
2
Emergency brake assistance
system (Front Assist)*
Introduction
Related video
Fig. 256
On the instrument panel display: ad-
Fig. 257
vance warning indications.
The objective of the system is to prevent
head-on collisions against objects that may
be in the vehicle's path or minimise the con-
sequences of such impacts.
Depending on several factors and how criti-
cal the situation is, the system operates in a
staggered manner. First it warns the driver,
»
273