Seat Tarraco 2020 Owner's Manual page 319

OR: switch the automatic activation on and
●
off in the Easy Connect system.
The automatic activation of the parking aid
can be switched on and off in the Easy Con-
›››
nect system page 82:
Switch the ignition on.
●
Select: infotainment button
● 
> Parking and manoeuvring
Select Automatic activation . If the box
●
is checked , the function is connected.

If activated automatically, an audible sound
warning will only be given when obstacles in
front are at a distance of less than 50 cm. ap-
prox.
CAUTION
The automatic connection of the Parking
Aid only works when you are driving slowly.
If driving style is not adapted to the circum-
stances, an accident and serious injury or
damage may be caused.
Help with parking and manoeuvring
Visual indication segments
> SETTINGS
.
Parking Aid display on the Easy Con-
Fig. 290
nect system screen.
The optical indication of the segments works
as follows:
– White segments: the obstacle is more
than approx. 30 cm away from the path
or in the direction opposite to travel.
They are also displayed when the elec-
tronic parking brake is activated.
– Yellow segments: the obstacles lie on
the vehicle's path and are at a distance
of less than approx. 30 cm away.
– Red segments: obstacles are less than
approx. 30 cm away.
With the Media System Plus, Navi System or
Navi System Plus, yellow lines show the ex-
pected trajectory based on turns of the steer-
ing wheel.
If an obstacle is located in the vehicle's way,
the corresponding audible warning will
sound.
When the penultimate segment is displayed,
the vehicle has reached the collision zone. In
the collision zone, the obstacles are repre-
sented in red, including those out of the path.
›››
Stop the vehicle! in Introduction on
›››
page 314, in Introduction on
page 314 !
In the event the car is equipped with the Top
View Camera system, Park Assist visual guid-
ance will appear in accordance with the view
selected in the Top View Camera system.
Setting the indications and audio
signals
The indications and audio signal settings are
›››
in Easy Connect* page 82.
Automatic activation
–  off .
on

Front volume*
Volume in the front and rear area.
Front sound settings/sharpness*
Sound tone in the front area.
»
317