Seat Tarraco 2020 Owner's Manual page 177

Function button: function
: If this function is
Switch off screen (in 10 seconds)
active and the infotainment system is not used,
the screen will automatically switch off after ap-
prox. 10 seconds. Pressing the screen or pressing
one of the infotainment buttons will turn the
screen on again.
: To select the brightness level of the
Brightness
screen.
: To select the type of display ( Day ,
Day / Night
or Automatic ).
Night
: The confirmation tone when a
Touchscreen tone
function button is pressed is active.
: The proximity sensors are active.
Proximity sensor
›››
Also see page 173, Proximity sensor.
: In standby mode, the
Show clock in standby mode
time is displayed on the infotainment system
screen.
: Change the time and date settings.
Date and time
: To select the time source (GPS
Clock time source
or manual).
: The time and date can be selected using
GPS
the function button. In this case, the
Time zone
and function buttons for manual
Time Date
entry will not be active.
: The time and date can be set manual-
Manual
ly using the and function buttons.
Time Date
: To set the time manually.
Time
: To adjust the desired time zone.
Time zone
Introduction
Function button: function
: To select the time display format (12
Time format
or 24 hours).
: To set the current date.
Date
: To select the date display format
Date format
( DD.MM.YYYY , YY-MM-DD or MM-DD-YY ).
: To select the desired language for texts
Language
and phrases in the voice control system.
: To select additional key-
Additional keypad languages
board languages.
: To set the units of measurement of the vehi-
Units
cle's displays: distance, speed, temperature, volume,
consumption and pressure.
Data transfer for SEAT apps
: This allows data to be
Data transfer for SEAT apps
exchanged between the vehicle and SEAT apps.
They are not personal data.
: Change the level of interaction
Operation via apps
with apps.
: This limits specific functions that
Deactivate
require a higher level of security.
: Allows 100% of functions of the app,
Confirm
and certain specific actions on the Infotain-
ment system have to be confirmed.
: Allows all available functions to be exe-
Allow
cuted from the app.
: To change the voice control settings
Voice control
›››
page 177.
Function button: function
: To eject the data medium (SD/USB
Remove safely
card) from the system. After correctly ejecting the
data storage device from the system, the function
button becomes inactive (grey colour).
: When the original factory settings
Factory settings
are restored, all inputs and settings that are made
are deleted, depending on the selected settings.
: To change the Bluetooth ®
Bluetooth
settings.
a) : To change the WLAN access point settings
WLAN
›››
page 211.
: Display of the system information
System information
(device number, hardware and software versions).
: To update the navigation data, do
Update
›››
page 215 No remove the memory card while
the navigation data are being installed.
: Information about copyright.
Copyright
: Opens the Infotainment system's
Configuration wizard
initial configuration wizard.
a) Only available for the model: Navi System Plus.
Note
For the proper functioning of the Infotain-
ment system it is important that the date
and time set in the vehicle are correct.
›››
page 242
175