Seat Tarraco 2020 Owner's Manual page 247

Make sure there are no objects between the
pad and the mobile phone.
The mobile phone will start charging auto-
matically. For further information about
whether your mobile device uses Qi technol-
ogy, check your phone's user manual or visit
the SEAT website.
"Mobile Signal Amplifier"
The "Mobile Signal Amplifier" allows you to
reduce the radiation in your vehicle and enjoy
better reception.
For safety reasons, it is recommended that
you pair the system and the mobile using
®
Bluetooth and place it on the Connectivity
Box pad, for the best reception without hav-
ing to handle the mobile phone.
To establish a connection with the vehicle's
external aerial:
Place your mobile device in the middle of
●
the pad with the screen facing up
›››
.
Make sure there are no objects between the
pad and the mobile phone.
Your mobile phone will automatically be
ready to make use of the external aerial.
WARNING
The mobile phone may heat up due to the
●
wireless charging. Think about this before
Operating modes
you pick it up, and take care when removing
it.
There must be no metallic or other ob-
●
jects between the mobile phone and the
housing, to prevent the functionality of the
Connectivity Box from being affected.
Note
Your mobile device must support the Qi
●
inductive charging interface standard for
proper operation.
The charging time and the temperature
●
vary in accordance with the device used.
The maximum charging capacity is 5 W.
●
Qi technology does not allow you to
●
charge more than one mobile device simul-
taneously.
No improvement in reception can be
●
guaranteed if there is more than one mo-
bile phone on the pad.
You are advised to keep the engine run-
●
›››
Fig. 239
ning to guarantee proper wireless charg-
ing.
When a telephone with Qi technology is
●
connected by USB, it will be charged by the
means specified by the manufacturer.
245