Seat Tarraco 2020 Owner's Manual page 119

Interior lights
Lighting of the instrument panel,
displays and switches
Related video
Fig. 99
Depending on the model, the lighting of the
instrument panel and switched can be adjus-
ted in the Easy Connect system, using the
›››
button page
> SETTINGS

With the ignition on and without light activa-
tion, the analogue instrument panel lighting
remains activated in daytime light conditions.
The lighting is reduced as the exterior light di-
minishes. In some cases, e.g. when driving
through a tunnel without the

tive, the instrument panel lighting may even
switch off. The objective of this function is to
provide the driver with a visual indication that
he or she should activate the dipped beam.
If your vehicle is equipped with a digital in-
strument panel (Digital SEAT Cockpit), the
following message will appear Turn on the
on the instrument panel.
lights
Interior and reading lights
Detail of roof lining: front lighting of
Fig. 100
the passenger compartment.
Knob
82.


function ac-
 
/
Glove compartment and luggage com-
partment lighting*
When opening and closing the glove com-
partment on the front passenger side and the
Lights
Function
Turning the rear interior lights on or
off.
The interior lights come on automati-
cally when you unlock the vehicle,
open a door or remove the key from
the ignition.
The light goes out a few seconds after
closing all the doors, when locking the
vehicle or connecting the ignition.
Turning the reading light on and off
rear lid, the respective light will automatically
switch on and off.
Footwell lighting*
The lights in the footwell area below the dash
(driver and front passenger sides) will switch
on when the doors are opened and will de-
crease in intensity while driving. This intensity
setting can be changed through the infotain-
ment system menu (key
> SETTINGS >

lIGHTING > Interior lighting
›››
page 82).
Ambient light*
The ambient light lights up the area of the
centre console and the footwell area and,
depending on the version, the front door pan-
els as well.
The intensity of the ambient light can be ad-
justed using the menu Easy Connect menu
(button)
> SETTINGS > Background

›››
page 82).
lighting
Note
Depending on the features fitted in the
●
vehicle, LEDs can be used for the following
interior lights: front vanity mirror light, rear
vanity mirror light, footwell light, sun blind
and glove compartment light.
The reading lights switch off when the ve-
●
hicle is locked using a key or after several
minutes if the key is removed from the
»
117