Seat Tarraco 2020 Owner's Manual page 239

Function button: function
To open call lists of the connected
CALLS
›››
mobile telephone page
To open the Phone settings
SETTINGS
menu.
Instructions and symbols of the
phone management system
Active call.
Fig. 228
Operating modes
241.
Conference call.
Fig. 229
Display: Meaning
Name of the mobile operator of the connec-
A
ted device.
Stored telephone number or name. If the
name stored in the phonebook has an as-
signed photo, it can be displayed: select
B
Telephone > Settings > User
profile > Show pictures for
*.
contacts

To accept a call.
To end a call.

OR: To reject an incoming call.
To mute or to reactivate the ring tone during

an incoming call.
To mute the microphone during an active

call and to reactivate it.
›››
Fig. 228
Multiple calls
The telephony management system allows
the user to interact with up to three calls on
the screen.
Only one of the calls can be active.
Conference call
The user can merge several calls into a single
one by making a conference call by pressing
button
calls for this to work. Once the conference
call has started, the user can add up to 5 par-
ticipants.
Once the conference call is established, the
user can consult the list of participants by
pressing on the conference call image
›››
Depending on the mobile device, the call
from a conference call participant can be
›››
Display: Meaning Fig. 228
The active call is put on hold. While on hold
the listener will not hear the conversation. To

reactivate it, press the call accept button
To reject it, press the reject button

Press to add a participant to the active call.

Connected mobile telephone charge status.
Strength of the signal received by the mo-

bile telephone.
. There must be a minimum of two

Fig. 229 .
C
.

.

»
237