Seat Tarraco 2020 Owner's Manual page 179

Voice control
How it works
Voice control: main screen
Fig. 169
Many of the radio, media, telephone and nav-
igation functions can be changed by voice
commands.
The voice control of the infotainment system
will only be available for the language selec-
›››
ted in System settings page
›››
Voice control settings page
●
Start and stop voice control
To activate voice control, briefly press the
●
button on the multifunction steering wheel
or the infotainment system.
When activating voice control, a dialogue
●
start tone will sound and the main voice con-
›››
trol screen will be displayed,
main screen will appear in the format selec-
ted in Voice control settings
The spoken indications guide you through the
following "dialogue".
Speak the desired command and follow the
●
instructions in the "dialogue". Often a func-
tion can be activated by different spoken
commands. If in doubt, try speaking a com-
mand or say Help.
When an action is taken (e.g., call a con-
●
tact), the voice control ends automatically
and you must activate it again if you want to
continue with it. There are certain commands
after which the voice control does not end,
and it waits by saying Next command? .
To manually end voice control, press and
●
hold the button
confirmation signal sounds, or briefly press
the button twice, or press the function but-

ton in the upper right corner of the screen.

You can also end the voice control by
●
speaking the following commands: Stop or
174.
Cancel.
179.
Voice control help
It is recommended to listen to the Help the
first time you use the voice control.

Activate voice control
●
Say the command Help to start it in the lan-
●
guage indicated System Settings , and fol-
low the instructions in the dialogue. The Help
Fig. 169, (the
Introduction
›››
page 179).
until the corresponding

.

command can also be spoken followed by a
function of the infotainment system, such as
"Help with navigation".
Interacting with the dialogue mode
Icons in upper left corner:
The system waits for a user's command.

The system has recognised a command

and will act shortly.
The system transmits a spoken com-

mand and confirms the command that
has been given.
The system is in paused mode. (max. 3

minutes).
Hide or show the voice control menu
 
/
›››
Fig. 169.
Operation during the dialogue
While the infotainment system transmits a
spoken instruction, the symbol

played on the screen.
You can stop the speech by pressing the
●
upper left icon on the screen or button
voice recognition will resume for the user.
IMPORTANT: The system will ONLY recog-
nize a command when the symbol
displayed as "active" on the panel or on
the touchscreen.
will be dis-
and

is

»
177