Android Auto - Seat Tarraco 2020 Owner's Manual

Requirements
In order to use Apple CarPlay™, the following
requirements must be met:
Make sure that you do not have Apple
●
CarPlay™ restricted on your device, at: Set-
tings > General > Restrictions >
.
CarPlay > ON
The mobile device must be compatible with
●
Apple CarPlay™.
Initiating the connection
In order to initiate the connection with the de-
vice, just connect it to the Infotainment sys-
tem via the USB cable.
A pop-up screen will appear, which will re-
●
quest that you accept the device.
If you start the session using Apple
●
CarPlay™ technology, it will not be possible
to pair another device via Bluetooth
lowing message will appear in the main
Phone menu:
Please disconnect Apple CarPlay
first to connect a different mo-
bile phone.
Holding down the button will start the

Apple™ voice "engine".
To return to the basic contents of the Infotain-
ment system, press the SEAT icon.
Connectivity
Android Auto™*
3 Valid for compatible Android mobile phones.
Android Auto™ is a protocol which enables
communication between a device and the in-
fotainment system.
This makes it possible to display and operate
content and functions on the device from the
screen of the infotainment system.
Requirements
In order to use Android Auto™, the following
requirements must be met:
The mobile device must be compatible with
●
Android Auto™.
The Android Auto™ application should al-
●
ready be downloaded and installed on the
mobile device.
® . The fol-
Initiating the connection
In order to initiate the connection with the de-
vice, just use the USB cable to connect it to
the infotainment system and follow the in-
structions on the device to be paired.
The first connection to Android Auto™ must
●
be done while the vehicle is stationary.
Once the first pop-up window about ac-
●
cepting data transfer between the car and
the device has been accepted, a message
will appear requesting that you check your
mobile device for the confirmations needed
to pair it with the Infotainment system.
If you are starting the session using Android
●
Auto™ technology, the device also automati-
cally connects to the Infotainment system via
Bluetooth ® and it will not be possible to pair
®
another device via Bluetooth .
Holding down the button will start the

Android™ voice "engine".
To return to the basic contents of the Infotain-
ment system, press the button.

Note
Some devices require a change in the USB
connection mode in order to use Android
Auto™.
Make sure that your device is in "Media
●
Transfer Protocol (MTP)" mode before it is
connected to the Infotainment system.
Note
Android Auto™ requires the use of Google™
services, as well as certain basic applica-
tions of the Android system.
Make sure that you always have Google™
●
services updated in order to use this tech-
nology.
185