Offroad Mode - Seat Tarraco 2020 Owner's Manual

Function button: function
b)
: To start Offroad navigation.
Waypoints mode
a) This functionality will depend on the country.
b) Only available on model: Navi System Plus.
Navigation in Offroad
mode* 1)
Introduction
Offroad* navigation is a function for offroad
driving that provides directions in "non-digi-
tised areas" at low speeds.
Non-digitised areas are areas about which
the system does not have information for the
streets or terrain. It does not detect streets,
buildings or natural limits such as mountains
or rivers, although they may be shown on the
map.
Offroad* navigation is not suitable for driving
on conventional roads as it does not detect
one-way streets, motorway entries or similar.
1) Only available for the model: Navi System Plus
Operating modes
Offroad Navigation Menu
Offroad Navigation Menu start
Fig. 212
Press the SETTINGS function button in the
main Navigation menu.
In the menu, press the Waypoint mode
●
function button.
The Offroad Navigation menu opens
●
›››
Fig. 212.
Function buttons in the Offroad Navigation
menu
Function button: function
: Initiates the plotting of an Offroad tour.
RECORD
: Opens a list allowing the selection of a
MEMORY
stored Offroad tour.
: Ends Offroad navigation.
EXIT
Recording an Offroad tour
Recording an Offroad tour
Fig. 213
An Offroad tour is formed by a series of stor-
ed waypoints.
Starting recording
In the Offroad Navigation menu, in the pop-
●
up window press the pop-up button.
RECORD
In the pop-up window, the user is able to
●
plot the tour with a given destination or start
plotting the route without giving a final desti-
nation.
Starts plotting the route.
●
The offroad markers can be recorded by in-
dicating a manual waypoint.
In the Offroad Navigation menu, press the
●
function button. The tour
ADD WAYPOINT
»
227