Scan Automatic Playback; Tp Traffic Information - Seat Tarraco 2020 Owner's Manual

Manually tuning a station frequency
Briefly press the settings button.
Selecting a station using the mem-
Hide the fre-
ory button also ends the manual
quency band
selection of frequencies. If no oper-
ations are performed, the frequen-
cy band is hidden after a while.
Presetting stations
Press and hold the desired preset
›››
button Fig. 181 until an audible
Saving the sta-
signal is heard.
tion that is be-
ing listened to.
The tuned station is stored on a
preset button.
›››
Press the
Stations
tion button to open the station list.
The stations that are already stor-
ed on a memory key are marked on
the station list with the symbol 
›››
Fig. 182.
Select the desired station by
Saving a sta- pressing and holding it down on
tion from the the screen. A screen opens for sav-
stations list ing the station on the memory but-
tons.
Press the memory key where the
station will be saved.
A sound is heard and the station is
saved on the memory button. Re-
peat the process to continue sav-
ing other station on the list.
Operating modes
Presetting stations
Delete preset
stations
Automatic playback (SCAN)
When automatic playback is active, all tune-
able stations in the selected frequency band
are played for approximately 5 seconds
each.
Start and end automatic playback
Fig. 181 func-
Start automatic
playback
End automatic
playback
Traffic information (TP)
It is only possible for traffic information to be
tracked with the TP function if the station in
question can be tuned. Stations with the traf-
fic information function are shown on the RA-
The Settings menu can be used
to delete all of the saved stations
together, or separately
›››
page 196.
Press the function button
Settings
and then select .
Scan
Press the function button to

stop automatic playback on the
station that is being played.
Automatic playback also ends
when a station is selected man-
ually using the memory buttons,
or when the screen is changed.
DIO main menu and on the station list with
››› ›››
the symbol TP Fig. 181 and
Some stations without their own traffic infor-
mation support the TP function by broad-
casting traffic announcement from other sta-
tions (EON).
Activating and deactivating the TP func-
tion
In the Settings (FM, AM, DAB) menu,
●
activate or deactivate the
 
function button by
Traffic programme (TP)
›››
pressing it page 196.
Active TP function and station selection
Traffic announcements are played in Audio
mode.
If a station without the TP function in FM mode
is selected, the radio tries to find stations with
this function in the background. If none are
found, it will be displayed half way up the left

hand side of the screen .
In AM mode or in Media mode, a traffic sta-
tion is automatically tuned in the background
as long as there is one available. Depending
on the situation this operation may take some
time.
Fig. 182.
»
195