Setup - Seat Tarraco 2020 Owner's Manual

Additional information and display
options
The displays appearing on the screen may
vary depending on the settings, and may
differ from those described here.
The status bar on the screen can display, for
example, the current time and outside tem-
perature.
All displays can be viewed only after com-
pletely restarting the Infotainment system.
Initial configuration wizard
Initial configuration wizard
Fig. 168
It will help you to set up your Infotainment
system the first time you switch it on.
Every time you switch on the Infotainment
system, the initial setup screen will appear
›››
Fig. 168 if any parameters have not been
174
Infotainment System
set or if the NEVER function button has not
been pressed.
Function button: function
Closes the Configuration Wizard, and
the main menu or last mode in which
CLOSE
you used the Infotainment system will
appear.
Disables the possibility of changing
the settings of the Infotainment sys-
tem. To configure the system go to:
NEVER
and select Con-
System settings
figuration wizard
Starts up the Configuration Wizard.
START
If the system includes navigation, the
date and time are set automatically
A
by the GPS.
Search and save the radio stations
with the best reception at that time in
B
all available bands.
Link your mobile phone to the Infotain-
C
ment system.
Add your home address using your
a) current position or by manually enter-
D
ing an address.
Previous or next parameter to config-
ure.
When a parameter has been config-
PREVIOUS
ured, the only way to reconfigure it is
by clicking on it on the main menu, not
NEXT
by using the Previous/Next buttons.
When you configure a parameter,
will be displayed over it.
Function button: function
Once one or more settings have been
applied, finalise the configuration in
the main menu of the wizzard.
If you have not set all the parameters,
FINISH
the Initial Configuration Wizard will
start the next time you turn the Info-
tainment system on.
a)
Only valid for Navi System and Navi System Plus.
Menu and system settings
.
The settings that can be selected varies de-
pending on the country and the equipment in
question, and on the vehicle's equipment.
Press the Infotainment button
●
press the
SETTINGS
Press the function button of the main menu or
the functions for which you want to change
the settings. All settings are automatically
applied when the menus are closed.
Function button: function
: To change the screen settings.
Screen
: To select the main menu display mode
Menu
( Mosaic or Carousel ).

and then

function button.