Seat Tarraco 2020 Owner's Manual page 130

Seat functions
Memory function*
On the outer side of the driver's seat:
Fig. 115
memory buttons.
Memory buttons
Individual settings for the corresponding seat
can be stored with the memory buttons. Addi-
tionally, settings for the exterior mirrors can
be saved with the memory buttons of the
driver seat.
Save the settings of the driver seat and
the exterior mirrors while driving forward
Apply the electronic parking brake.
●
Move the gearshift to the neutral position.
●
Switch the ignition on.
●
Adjust the driver seat and the exterior mir-
●
rors.
Press for longer than 1 second
●

›››
Fig. 115.
128
Operation
Press the memory button in which to store
●
the settings within approx. 10 seconds. A
warning sound will confirm they have been
stored.
Storing the passenger rear view mirror
settings while driving in reverse
Apply the electronic parking brake.
●
Move the gearshift to the neutral position.
●
Switch the ignition on.
●
Press the required memory button.
●
Select reverse gear.
●
Adjust the front passenger exterior mirror so
●
that you can see, for example, the kerb area
well.
The new position of the mirror will be stored
●
automatically and allocated to the vehicle
key that was used to unlock the vehicle.
Activating settings
With the vehicle stopped and the ignition
●
switched on, press and hold the correspond-
ing memory button until the saved position is
reached.
OR: With the ignition switched off and the
●
driver's door open, briefly press the corre-
sponding button.
The front passenger side exterior mirror au-
●
tomatically changes from the position stored
for reversing as soon as the vehicle moves
forward at a speed of at least 15 km/h
(10 mph) or when the gear selection lever is
changed to a position other than R
›››
page 121.
To activate the memory function of the ve-
hicle key
Condition: a position must be memorised in
the memory.
Open the driver-side door.
●
Press and hold any memory button.
●
Within three seconds of the move being
●
completed, push the open button
vehicle key. An audible warning confirms the
settings have been activated.
Adjusting the wing mirrors for driving and
assigning driver seat settings to a vehicle
key
Activate the memory function of the vehicle
●
key
With the ignition switched on, adjust the ex-
●
terior mirrors and the seat.
An audible warning confirms the saved po-
●
sition, both when turning off the ignition and
locking the vehicle. The settings are assigned
to the vehicle key.
To deactivate the memory function of the
vehicle key
Condition: a position must be memorised in
the memory.
on the
