Seat Tarraco 2020 Owner's Manual page 175

The on-screen keypad is used for functions
such as entering an memory name, selecting
a destination address or entering a search
term for searching long lists.
The input line with cursor is located in the top
bar of the screen. All inputs are displayed
here.
Input windows for "free text input"
In the input masks for open text, you may en-
ter letters, numbers and characters in any
combination.
Input windows for selecting a saved entry
(e.g. selection of a destination address)
It is only possible to enter a sequence of let-
ters, numbers and characters that matches a
stored entry.
Matches are suggested on the input line
›››
Fig. 167 . In the case of compound
4
names, it is necessary to enter a space.
Overview of the function buttons*
Function icon and text: operation and ef-
fect
Letters and Press them to copy them into the input
digits line.
Press to change the keypad to anoth-
er language. Keypad languages can
1
be selected from the menu System
settings > Speech
Function icon and text: operation and ef-
fect
Press to show symbols on the keypad.
2
If there are fewer than 99, it shows the
number of entries that can be selec-
3
ted. Pressing opens the list according
to the entry.
Scroll bar, the size of which depends
4
on the number of matching entries.
If the button is held down, special
characters based on that letter are
displayed. Press the desired charac-
5
ter to enter it. Some special charac-
ters can be written out instead (e.g.
"AE" for "Ä").

Space bar
Deletes characters on the input line
from right to left.

Press and hold to delete several char-
acters.
Close the input window.
BACK

Proximity sensor
3 Valid for: Navi System and Navi System Plus.
The Infotainment system is equipped with an
integrated proximity sensor
The screen switches from display mode to
automatic operation when your hand moves
.
Introduction
›››
Fig. 160 .
11
toward it. In operation mode, the function but-
tons are automatically highlighted to facili-
tate their use.
Motion sensors (gesture control)*
3 Valid for: Navi System and Navi System Plus.
Depending on the version, the infotainment
system has motion sensors that can be used
to change certain functions, e.g. next station,
next memory bank, previous track, etc.
Press the infotainment button
●
tings > Screen > activate/deactivate
proximity sensor.
If the sensors are active, when you move your
hand close to the screen the silhouette of a
hand will be displayed in the lower right cor-
ner.
With this function the system switches to the
previous or next station, track, memory bank,
etc., when you move your hand from left to
right, or vice-versa, in front of the screen. An
audible warning also sounds.
 > Set-
173