Seat Tarraco 2020 Owner's Manual page 156

Climatronic* controls
Automatic mode

Automatic adjustment of temperature, fan,
and air distribution. Automatic mode is disa-
bled when the ventilation is modified manual-
ly.
Cooling mode

Press the button to switch on or off the cool-
ing system.
Temperature /
1 2
The temperature of the right and left sides
can be adjusted separately using the adjust-
ers. The selected temperature is shown on
the display of the climate control panel.
Synchronisation: press button
settings on the driver's side apply to the pas-
senger side. Use the temperature regulator
154
for the passenger side to set a different tem-
perature.
Blower

The power of the fan is automatically adjus-
ted.
The fan is also adjusted manually by turning
the control.
Air distribution
The airflow adjusts automatically for comfort.
It can also be manually distributed to the de-
sired zone by pressing the corresponding
button:
The airflow is directed towards the chest

so that

The airflow is directed towards the foot-

well.
The airflow is directed at the windscreen.

Operation
 /  / 
In the centre console: Climatronic con-
Fig. 153
trols.

Maximum cooling power
The recirculation of air and the cooling sys-
tem turn on automatically and air distribution
adjusts automatically to the position

Defrost/demist function
The air drawn in from outside the vehicle is di-
rected at the windscreen and air recirculation
is automatically switched off. To defrost the
windscreen more quickly, the air is dehumidi-
fied at temperatures over approximately
+3°C (+38°F) and the fan runs at maximum
output.
Residual heat

When the engine is still warm but the ignition
switched off, the residual heat of the engine
can be used to keep the vehicle interior
.
