Rear Parking Aid - Seat Tarraco 2020 Owner's Manual

the Parking assist screen of the Easy Con-
nect system.
Whenever any of the car doors, rear lid or
●
bonnet are opened.

Rear parking aid*

Description
The rear parking aid is an audible and visual
assistant that warns of obstacles located be-
hind the vehicle.
There are sensors integrated in the rear
bumper. When they detect an obstacle, you
are alerted by audible warnings and visually
on the Easy Connect system.
If the Top View Camera* is installed, the rear
parking aid will issue an audible warning
about objects near the rear of the vehicle,
and the Top View Camera* image will be
available on the Easy Connect screen, giving
a real image of the objects around the car.
Make particularly sure that the sensors are
not covered by adhesives, residues, dirt and
the like, as this could affect the system's op-
›››
eration. Cleaning instructions
The approximate measurement range of the
rear sensors is:
Side area: 0.60 m
Help with parking and manoeuvring
Central area:
As you approach the obstacle, the frequency
of the audible signals will increase. The signal
will sound continuously at around 0.30 m:
›››
Stop! in Introduction on page
›››
in Introduction on page
If the separation is maintained, the warning
volume is reduced after about 4 seconds.
Parking Aid operation
Parking Aid connection
Select reverse gear.
●
Parking Aid disconnection
Place the selector level in position P, N or D
●
(for automatic gearboxes) or disengage re-
verse (for manual gearboxes).
Set the lever to the N or D position to maintain
the system active for approximately 8 sec-
onds before switching off. During that time,
Parking assist will switch off if:
The selector lever is moved to position P.
●
OR: the vehicle accelerates to approx.
●
page 377.
15 km/h (9 mph) or faster.
If the Top View Camera* is installed, rear
parking aid will be automatically deactivated
when disengaging reverse gear.
1.60 m
314,
314!
Manual disconnection of Parking Aid dis-
play (the audible sounds remain active)
Press a button on the main menu of the fac-
●
tory-assembled infotainment system.
OR press the BACK  function button.
●
Temporary suppression of sound in Park-
ing Aid
Press the function button. If you have the
●

Top View Camera* system installed, you can-
not use the temporary suppression of sound
in Parking Aid.
Change from reduced view to full view
Select reverse gear.
●
OR: on vehicles fitted with reverse assist
●
(Rear View Camera "RVC") click on the car
icon of the reduced display.
Switch to the reverse assist image (Rear
View Camera "RVC")
Select reverse gear.
●
OR: press the RVC function button.
●
Setting the indications and audio signals
The indications and audio signal settings are
›››
in Easy Connect* page 82.
*: volume in the rear area.
● Rear volume
● Rear sound settings/treble
tone in the rear area.
*: sound
»
319