Seat Tarraco 2020 Owner's Manual page 283

Connecting and activating the ACC
To connect and activate the ACC, the posi-
tion of the gearbox lever, the vehicle speed
and the position of the third level of the ACC
must all be taken into account.
With manual transmission, the gear lever
●
must be in any gear except first. With auto-
matic transmission, the gear lever must be in
position D or S. Speed must be higher than
30 km/h (18 mph) approx.
To activate the ACC, move the third lever to
●
›››
position Fig. 265 . At this time, the

1
ACC is not active and there is no program-
med speed.
›››
Next, press button Fig. 266
● 
move the lever to position

›››
Fig. 265 . At this moment the ACC is ac-
2
tivated and the current speed and distance
are programmed. The picture in the box will
›››
change to Active mode Fig. 263
While ACC is active, the vehicle travels at a
set speed and distance from the vehicle
ahead. Both speed and distance can be
changed at any time.
Setting speed
To set the speed, move the third lever up
●
or down to the desired speed
–
›››
Fig. 263 . The speed adjustment is
6
made at 10 km/h (6 mph) intervals.
Driver assistance systems
If you wish to increase speed by intervals of
●
1 km/h (0.6 mph), move the lever to position
›››
Fig. 265

›››
button Fig. 266

The set speed can be changed when the ve-
hicle is stopped or during driving.
Setting your distance level
To increase or reduce the distance, press
●
button to the right or left
A
The instrument panel display modifies the se-
›››
lected distance
distance levels to choose from. SEAT recom-
mends level 3. The set distance can be
or
B
changed when the vehicle is stopped or while
›››
driving .
Disconnecting and deactivating the ACC
To disconnect the ACC move the lever to
●
.

position (fixed)

message appears and the func-
activated
tion is totally deactivated.
If you do not wish to disconnect the ACC, just
to switch it temporarily to inactive mode
(Standby), move the third lever to position
or press the brake pedal.
 3
+
It will also switch to inactive mode (Standby)
if the vehicle is stopped and the driver door is
opened.
, or to decrease it press
2
.
B
›››
Fig. 266.
Fig. 263 . There are 5
4
›››
Fig. 265 . An ACC de-
0
Adjusting the default distance level at the
start of your journey
In wet road conditions, you should always set
a larger distance with regard to the vehicle in
front than when driving in dry conditions
›››
.
In the Easy Connect system, you can pre-se-
lect the distance level when connecting the
ACC to: Very short, Short, Medium, Long and
Very long using button
 > SETTINGS >
›››
page
Driver assistance
Changing the driving profile
In vehicles with SEAT Drive Profile, the driving
profile selected can have an influence on the
ACC's acceleration and braking behaviour
›››
page 263.
In vehicles without SEAT Drive Profile, the be-
haviour of the ACC can also be affected if
any of the following drive profiles are selec-
ted in the Easy Connect system:
Normal
●
Sport
●
Eco
●
Convenience
●
In this case you must access the ACC set-
tings using button > SETTINGS > Driver

›››
page 82.
assistance > ACC
82.
»
281