Seat Tarraco 2020 Owner's Manual page 343

example, it may very well be necessary to
adjust the cooling system or mount thermal
protection plates. SEAT recommends visiting
a SEAT dealership for this.
If a towing bracket is retrofitted, the distance
specifications should always be kept in mind.
The distance between the centre of the ball
›››
head and the road Fig. 304
be less than indicated. This also applies when
the vehicle is fully loaded, including the tech-
nically permissible maximum vertical load on
the coupling device.
›››
Distance specifications Fig.
Attachment points (lower part of the vehi-
A
cle)
1090 mm
B
65 mm min.
C
391 mm
D
348 mm
E
595 mm
F
1,050 mm
G
WARNING
If the cables are improperly or incorrectly
connected, this may lead to malfunctions
in the entire vehicle electronic system, as
well as to accidents and serious injuries.
Never connect the trailer's electric sys-
●
tem to the electrical connections of the tail
lights or any other unsuitable power sour-
Towing bracket device*
ces. Only use suitable connectors to con-
nect the trailer.
The towing bracket should be retrofitted
●
only at a specialised workshop.
WARNING
If the towing bracket is badly fitted or un-
must never
D
suitable, the trailer may separate from the
vehicle while driving. This could cause seri-
ous accidents and fatal injuries.
Note
304:
Only use towing brackets that have been
●
approved by SEAT for the model in ques-
tion.
In some versions, the fitting of a conven-
●
tional towing hook solution is not recom-
mended. Please consult your Technical
Service.
341