Configuration for sharing a con-
nection over WLAN
Establishing the connection with the wire-
less network (WLAN)
Press the Infotainment button
●
press the Settings menu.
Activate the wireless network. To do so,
●
press the WLAN function button.
Activate the wireless network (WLAN) on the
●
device that is to be connected. If necessary,
refer to the manufacturer's instruction man-
ual.
Activate the mobile device assignment on
●
the Infotainment System. To do so, press the
Enable WLAN connection
vate the checkbox.
Enter and confirm the network key dis-
●
played on the device.
The following settings can also be made on
the menu Share connection :
WPA2 encryption auto-
●
Security level:
matically generates a network key.
Network key automatically
●
Network key:
generated. Press the function button to man-
ually change the network key. The network
1)
This function depends on the equipment and
the country in question.
188
key must have a minimum of 8 characters
and a maximum of 63.
WLAN Network name (maximum of
●
SSID:
32 characters).
●
Do not send network name (SSID):
Activate the checkbox to deactivate the visi-
and then
bility of the wireless (WLAN) network.
The wireless (WLAN) connection is establish-
ed. To complete the connection, it may be
necessary to enter other data into the device.
Repeat this process to connect other devices.
Wi-Fi Protected Setup (WPS)
button and acti-
Wi-Fi Protected Setup can be used to create
a ciphered local wireless network quickly and
simply.
Establish the connection with the wireless
●
network (WLAN)
Press the WPS button on the WLAN router
●
until the warning light on the router starts
flashing. If the WLAN router does not support
WPS the network must be configured man-
ually.
Infotainment System
1)
›››
page
211.
OR: Press and hold the WLAN button on the
●
WLAN router until the WLAN light on the router
starts flashing.
Press the WPS button on the WLAN device.
●
The wireless (WLAN) connection is establish-
ed.
Repeat this process to connect other devices.
Configure Internet access
The Infotainment System can use the WLAN
hotspot of an external device to establish an
internet connection.
Establishing the connection with the wire-
less network (WLAN)
Activate and check the wireless hotspot on
●
the external device. If necessary, refer to the
manufacturer's instruction manual.
Press the Infotainment
button and then
●
press the Settings menu; OR access Media
or SEAT Md. Ctrl. and press the SETTINGS
menu.
Press on the menu WLAN > Enable WLAN
●
and check the verification box.
connection
Press the Find function button and select
●
the device you want from the list.