Memory Buttons - Seat Tarraco 2020 Owner's Manual

broadcast the same station identification, or
to signal the other corresponding FM station
through DAB. When the corresponding FM
station has been found, "FM" is displayed be-
hind the name of the station. If the corre-
sponding DAB station becomes available
again, it returns to DAB mode after a while
and the "FM" identification is concealed.
Switch to a similar station: This allows
●
service providers to indicate alternative sta-
tions with similar content. In this way, if the ra-
dio loses coverage of a DAB station and does
not find an alternative FM or DAB frequency, it
is possible to tune to a station with similar
content.
Radio text
Some stations transmit additional text infor-
mation, the so-called radio text.
Radio text is displayed in the upper half of the
screen above the memory buttons
or on the Station Information or Radio text
›››
screens of the Display menu
The radio text display can be deactivated in
›››
the DAB Settings page 197.
Slideshow
Some stations transmit additional visual infor-
mation in the form of images.
Operating modes
These images are displayed as a slideshow
on the
Stations
›››
menu
Screen
The slideshow can be displayed in full screen
by pressing on the current image.
Screen Menu
The function buttons refer to the menu that is
displayed when the
›››
Fig. 184.
Function button: function
: Viewing the preset buttons
Preset list
: Simultaneous display of radio text and
Station List
slideshows instead of memory keys
: The radio text is displayed instead of the
Radio text

memory buttons.

: Slideshows are shown in full screen mode.
Slideshow
›››
Fig. 184
Note
page 193.
Not all DAB stations broadcast radio text
and slideshows.
or screens of the
Slideshow
page 193.
button is pressed
View
›››
Fig. 184.
›››
Fig. 185.
Memory buttons
RADIO main menu.
Fig. 186
In the Radio main menu, you can store sta-
tions from all available frequency wave-
lengths on the numbered function buttons.
These function buttons are called "memory
buttons".
Storing the station on the memory buttons
›››
See: Preset stations page 195.
Change the memory bank (screens)
Move your finger over the screen from left
●
to right or vice-versa.
OR: Press one of the function buttons
●
›››
Fig. 186
A
»
193