Seat Ibiza Owner's Manual
  1. Manuals
  2. Brands
  3. Seat Manuals
  4. Automobile
  5. ibiza
  6. Owner's manual

Seat Ibiza Owner's Manual

Hide thumbs Also See for Ibiza:
Table of Contents

Advertisement

Quick Links

OWNER'S
MANUAL
Ibiza

Advertisement

Table of Contents
loading

Related Manuals for Seat Ibiza

Summary of Contents for Seat Ibiza

  • Page 1 OWNER’S MANUAL Ibiza...

  • Page 2: About This Manual

    >> Because this is a general manual for the The section is continued on the follow- IBIZA, some of the equipment and functions ing page. This manual is divided into six large parts, that are described in this manual are not in-...
  • Page 3 Visual table of contents that uses graphics ● SEAT, S.A. Besides the regular care and maintenance of to indicate the pages containing “essential” the vehicle, its correct handling will help pre- information, which is detailed in the corre- serve its value.

  • Page 5: Table Of Contents

    Table of Contents Seat belts ......Opening and closing .....
  • Page 6 Dimensions ......SEAT Drive Profile* ..... . .

  • Page 7: The Essentials

    The essentials Exterior view ››› ››› ››› page 9 page 45 page 10 ››› ››› ››› page 8 page 45 page 49 ››› ››› page 56 page 11...

  • Page 8: Exterior View

    The essentials Exterior view ››› ››› ››› ››› page 46 page 48 page 47 page 50 ››› ››› ››› page 45 page 45 page 143 ››› ››› ››› page 47 page 47 page 51...

  • Page 9: Interior View (Left-Hand Drive)

    The essentials Interior view (left-hand drive) ››› ››› ››› ››› ››› page 10 page 34 page 23 page 38 page 13 ››› ››› ››› ››› ››› page 12 page 36 page 25 page 22 page 11 ››› ››› ››› ››› ›››...

  • Page 10: How It Works

    The essentials How it works Locking and unlocking the vehicle using the Unlocking or locking the driver's door ››› ● Locking: press the  Fig. 1 button. Opening and closing ››› Unlocking: press the  Fig. 1 button. ● Doors ●...
  • Page 11 The essentials Special Characteristics If the central locking system should fail to The rear lid opening system operates electri- work at any time, doors with no lock cylinder cally. It is activated by using the handle on The anti-theft alarm will remain active when ●...
  • Page 12 The essentials Unlocking the rear lid manually Bonnet ● To lift the bonnet, press the lever under the bonnet, in the centre, towards the left ››› Fig. 8 . The arrester hooks are released. ● Release the bonnet stay and secure it in the fixture designed for this in the bonnet.

  • Page 13: Before Driving

     ››› page 122 Manually adjusting the front seats Sliding sunroof* Fig. 12 Front seat: adjustment of the head re- straint. ● To raise or lower the head restraint, press the side button and move it upwards or downwards to the desired position.
  • Page 14 The seat belt lies flat and fits comfortably on the upper part of the body. The lap part of the seat belt lies across the pelvis, never across the stomach. The seat Positioning and removing the seat Fig.

  • Page 15: Airbags

    ››› Fig. 17 Fig. tively  ››› in Adjusting the steering wheel po- In conjunction with the seat belts, the front sition on page 63 airbag system gives the driver and the front » passenger additional protection for the head...
  • Page 16  ››› page 76 text “AIRBAG” in the upper region of the backrests. In conjunction with the seat belts, the side Side airbags* airbag system provides additional protection for the upper body in the event of a severe side collision.

  • Page 17: Child Seats

    The essentials Head-protection airbags*  ››› in Curtain airbags* on page 76 Child seats Important information regarding the front passenger's airbag Location and deployment area of the Fig. 22 head-protection airbag. There is a head airbag on each side of the in- ›››...
  • Page 18 To adjust the passenger seat to accommo- straint system mounting using lower retain- date a child's seat and get the seat belt in a ing rings and the upper retaining strap. Fig- perfect position, adjust the passenger back- ›››...
  • Page 19 Compliance with current national legislation and the manufacturer's instructions is required when using or installing child seats. For semi-universal chairs where the securing system is the car safety belt and the support bracket, do not use them in the centre rear seat.
  • Page 20 The essentials Retaining the child seat with the ISOFIX/iSize system and Top Tether* Fig. 27 Position of the Top Tether rings on the ISOFIX/iSize securing rings. Fig. 26 back of the rear seat. Child seats can be secured quickly, easily FIX”...
  • Page 21 Please note the list of vehicles for use in this mass group. from the child seat manufacturer. Suitable for certain ISOFIX child restraint ISOFIX position not suitable for ISOFIX systems (CRS) that can be of the specific child restraint systems for this weight group or size class.
  • Page 22 29. Observe turer's instructions. the manufacturer's instructions. ● Pull on both sides of the child seat to en- ● Remove the protective caps of the “ISO- sure that it is properly anchored. FIX/iSize” rings by placing a finger in the ›››...
  • Page 23 Safety instructions on page 79 Child seats with the Top Tether system come with a strap for securing the seat to the vehi- cle anchor point, located at the back of the rear seat backrest and provide greater re- straint.

  • Page 24: Starting The Vehicle

    The essentials Starting the vehicle Turning on/switching off the ignition, glow Lights and visibility plugs reheating Ignition lock ● Switch ignition on: Turn the key to the Light switch position. ● Switch ignition off. Turn the key to the position. ●...
  • Page 25 The essentials Right turn signal: Right-hand parking ● When approaching a traffic jam Sym- Ignition switch- Ignition is switch- light (ignition switched off). In an emergency ed off ed on ● Left turn signal: Left-hand parking light ● The vehicle has broken down Dipped beam head- Dipped beam switch- ...
  • Page 26 The essentials Windscreen wipers and window wiper Knob Function More the lever to the required position: blade  Switches door contact control on (central Slow wipe. position).  The interior lights come on automatically Continuous wipe. when the vehicle is unlocked, a door is ...

  • Page 27: Easy Connect

    The essentials Easy Connect CAR menu settings (Setup) Easy Connect: Main menu. Easy Connect: CAR menu. Fig. 37 Fig. 38 To select the settings menus, press the Easy ● Press the system's button and then When you press the menu button, the last se- ...
  • Page 28 Distance, speed, temperature, volume, consumption – Measurement units ››› Service – Chassis number, date of next SEAT service inspection, date of next oil change service page 32 All settings can be reset: driver assistance, parking and manoeuvring, lights, rear view Factory settings – –...

  • Page 29: Driver Information System

    A specialised workshop will be able to pro- gramme or modify additional functions, ac- WARNING cording to the vehicle equipment. SEAT rec- ommends visiting a SEAT Official Service. Any distraction may lead to an accident, with the risk of injury.

  • Page 30: Outside Temperature Display

    The essentials Enabling the main menu Making changes according to the menu Menu Function Switch the ignition on. Make the desired changes with the rocker ● ● Station display on the radio. switch on the windscreen wiper lever or the ●...
  • Page 31 The essentials Gear-change indicator Bonnet, rear lid and doors open Illustra- ››› Key to Fig. 42 tion Do not continue driving!  The bonnet is open or is not properly ››› page 232. closed Do not continue driving!  The rear lid is open or is not properly ›››...

  • Page 32: Journey Data

    The essentials Changing between display modes on the Priority 2 warning (yellow symbols) Menu Function Symbol flashing or lit; partly combined with audible Display and storage of the values for ● In vehicles without multifunction steering warnings. the journey and the consumption wheel: Press the rocker switch on the ...
  • Page 33 The essentials Personalising the displays by turning the thumbwheel on the multifunc- Menu Function tion steering wheel. Next, press the button In the Easy Connect system you can adjust again or wait several seconds. Distance cov- Distance covered in km (m) after ...
  • Page 34 Tips on how to save fuel will be displayed in mum speed, such as when travelling in a conditions that increase fuel consumption. SEAT distinguishes between services with en- country with different speed limits or for a Follow them to reduce consumption. The indi- gine oil change (e.g.
  • Page 35 A clock symbol or mileage, the service intervals are already appears and the number of days until the If the service was not carried out by a SEAT pre-defined. next service is due. dealership, the display can be reset as fol-...

  • Page 36: Cruise Control

    The essentials Cruise control Operating the cruise control system (CCS)* Fig. 43 On the left of the steering column: Fig. 44 On the left of the steering column: control and buttons for operating the cruise third lever for operating the cruise control. control.
  • Page 37 The essentials ››› Position of the turn signal lever Fig. 43 Function Effect ››› or the third lever Fig. 44 Briefly press button on the turn signal lever in the area  or press  the third lever to increase the speed in small increments of 1 km/h (1 mph) and set Increasing the set speed of the cruise Press ...

  • Page 38: Warning Lamps

    – information on the instrument pan- – el display el display ››› Driver or passenger has not fas- page  tened seat belt.  Parking brake on. ››› page  Use the foot brake! Do not continue driving!  ›››...
  • Page 39  ››› page  Fuel tank almost empty. Flashing: Fault in the engine coolant system. ››› Fault in airbag system and seat page  belt tensioners. ››› Do not continue driving! page   »...

  • Page 40: Gearbox Lever

    The essentials Gearbox lever ››› ››› page page   Fault in the battery. Low consumption driving status Manual gearbox ››› Driving light totally or partially page faulty.  On the instrument panel ››› Fault in the cornering light sys- page tem.

  • Page 41: Air Conditioning

    The essentials ● Release the clutch.  ››› in Driving with manual gearbox on page 170  ››› page 170 Air conditioning How does Climatronic* work? In the centre console: Climatronic con- Fig. 49 trols To switch a specific function on, press the ap- The LED on each control lights up to indicate propriate button.
  • Page 42  Air recirculation   Seat heating buttons  Press the button to switch on or off the cooling system. Press the  button to apply the settings on the driver side to the passenger side. Actuate the temperature control for the passenger side in ...
  • Page 43 The essentials How does the manual air conditioning work*? In the centre console: Manual air condi- Fig. 50 tioning controls. To switch a specific function on, press the ap- The LED on each control lights up to indicate propriate button. Press the button again to that the respective function of a control has switch off the function.
  • Page 44 Heated rear window: this only works when the engine is running and switches off automatically after a maximum of 10 minutes.  Air recirculation  Press the button to switch on or off the cooling system.   Seat heating buttons  ››› in General notes on page 145  ›››...
  • Page 45 The essentials How does the heating and the fresh air system work? In the centre console: heating system and Fig. 51 fresh air controls. To switch a specific function on, press the ap- The LED on each control lights up to indicate propriate button.
  • Page 46 The essentials  Heated rear window: this only works when the engine is running and switches off automatically after a maximum of 10 minutes.  Air recirculation  ››› in General notes on page 145  ››› page 148...

  • Page 47: Fluid Level Control

    The essentials Fluid Level control Opening the fuel tank cap Open the fuel tank flap by pressing on the ● Filling capacities left side. Unscrew the cap by turning it to the left. ● Capacities ● Place it in the space on the hinge of the ›››...
  • Page 48 The essentials Oil properties Coolant even in warm climates where anti-freeze pro- tection is not required. Engine type Specification If for weather reasons further protection is Petrol without flexible serv- VW 502 00/VW 504 00 necessary, the proportion of additive may be ice interval increased, but only up to 60 %;...
  • Page 49 The level should be between the  and  To top up, mix water with a product recom- marks. If it is below , please visit a Techni- mended by SEAT. cal Service. In cold temperatures, add anti-freeze for win- dows.

  • Page 50: Emergencies

    The essentials Emergencies Opening and closing the fuse box situated Colour Amp rating below the dash panel Green ● Opening: remove the fuse box cover in the Fuses ››› Fig. direction of the arrow Orange ● Closing: click the cover back into place. Fuse location ...

  • Page 51: Bulbs

    The essentials Identifying a blown fuse ● Automatic gearbox: Move the selector lever Halogen headlight with DRL Type to position P. A fuse is blown if its metal strip is ruptured ››› ● If you are towing a trailer, unhitch it from Fig.
  • Page 52 The essentials Repairing a tyre with the anti-punc- ● Remove the lid from the filling tube ● Screw the compressor tyre inflator into the ››› Fig. 61 and screw the open end of the valve. ture kit tube into the tyre valve. ●...

  • Page 53: Changing A Wheel

    Fig. ● Fit the central wheel trim onto the wheel. ● Hook this into one of the cut-outs of the The lower part of the SEAT emblem letter “S”  wheel cover. ››› in Vehicle tools on page 82 should be in line with the inflation valve ›››...
  • Page 54 The essentials Wheel bolts ● Put pressure on the point of the cut-out for Loosen the wheel bolts only about one turn the valve. before raising the vehicle with the jack. ● Next fit the rest of the wheel cover. If the wheel bolt is very tight, push down the end of the spanner carefully with your foot.
  • Page 55 The essentials Raising the vehicle The anti-theft wheel bolt has a different cap. ● Find the support point on the strut (sunken This cap only fits on anti-theft wheel bolts area) closest to the wheel to be changed ››› and is not for use with standard wheel bolts. Fig.
  • Page 56 The essentials ces. These surfaces must be clean before fit- CAUTION Loosen the wheel bolts only about one turn ● ting the wheel. before raising the vehicle with the jack. The vehicle must not be raised on the cross- ● Never apply grease or oil to the wheel bolts bar.

  • Page 57: Snow Chains

    The essentials Snow chains with care as this means the tyre does not of- Remove wheel covers and any integral trim fer optimum driving properties. This is of par- ring before fitting snow chains. ticular importance when the road surface is Remove the chains when roads are free of wet.

  • Page 58: Emergency Towing Of The Vehicle

    The essentials Emergency towing of the vehi- Towline anchorages Driving style Attach the bar or rope to the towline ancho- Towing requires some experience, especially rages. when using a tow rope. Both drivers should realise how difficult it is to tow a vehicle. In- Towing The towline anchorages are located under experienced drivers should not attempt to...

  • Page 59: How To Jump Start

    The essentials How to jump start: description   ››› ››› in General information on page 85 in General information on page 85   ››› ››› page 85 page 85 Tow-starting How to jump start If the engine will not start, first try starting it Jump leads using the battery of another vehicle ›››...
  • Page 60 The essentials 2. Connect one end of the red jump lead to 8. Start the engine of the vehicle with the flat imprint on battery). Failure to comply could the positive terminal of the vehicle battery and wait for 2 or 3 minutes until result in an explosion.

  • Page 61: Changing The Windscreen Wiper Blades

    The essentials ● Extract the wiper blade from the wiper arm. Note The vehicles must not touch each other, oth- Fitting the wiper blade erwise electricity could flow as soon as the ● Insert the wiper blade onto the windscreen positive terminals are connected.
  • Page 62 The essentials ● Slide the blade adapter in the direction of ››› the arrow and remove the blade Fig. 76 Fitting the wiper blade With one hand, hold the top end of the wip- ● er arm. ››› Place the blade as shown in Fig.

  • Page 63: Safety

    This manual contains important informa- Ensure that the passenger in the central – tion about the operation of the vehicle, both rear seat always has the head restraint in Always reduce your speed as appropriate – for the driver and the passengers. The other the correct position for use.

  • Page 64: Correct Position For Passengers

    ››› level as the top of your head Fig. The safety equipment mentioned above Move the seat backrest to an upright posi- – works together to provide you and your pas- tion so that your back rests completely sengers with the best possible protection in against it.
  • Page 65 Safe driving Adjusting the steering wheel position Move the seat backrest to an upright posi- – Adjust the driver's seat so that there is at ● tion so that your back rests completely least 25 cm distance between the centre of Read the additional information carefully against it.
  • Page 66 ››› ling dash panel, out the window or on the seat. An ››› Fasten your seat belt securely page –...
  • Page 67 Safe driving Correct adjustment of rear head re- Properly adjusted head restraints are an im- WARNING portant part of passenger protection and can straints ● Any incorrect sitting position increases the reduce the risk of injuries in most accident risk of severe injuries. situations.

  • Page 68: Pedal Area

    Fig. the vehicle. ● Do not swap the centre rear head restraint with either of the outer seat rear head re- Wear suitable footwear straints. Risk of injury in case of an accident! Always wear shoes which support your feet...

  • Page 69: Seat Belts

    Every vehicle occupant must properly fas- The  symbol indicates that the passenger in ten and wear the seat belt belonging to his or this seat has fastened “his or her” seat belt. The control lamp illuminates to remind the her seat.
  • Page 70 Always keep both feet in the footwell in ● minor frontal or side collisions, rear-end colli- front of your seat as long as the vehicle is in Properly worn seat belts hold the occupants sions, rollovers or accidents in which the air- motion.
  • Page 71 Seat belts Head-on collisions and the laws of called “kinetic energy” is created both in the The slot in the seat belt buckle must not be ● passengers and inside the vehicle. physics blocked with paper or other objects, as this can prevent the latch plate from engaging se- The amount of “kinetic energy”...

  • Page 72: How To Properly Adjust Your Seatbelt

    Passengers in Position of seat belt during pregnan- Fig. 87 the rear seats who do not use seat belts en- danger not only themselves but also the front ››› Fig.

  • Page 73: Belt Pretensioners

    ● Always engage the retractor lock when you which are also available to you. Positioning seat belts are securing a child seat in group 0, 0+ or 1 ››› page Seat belts offer their maximum protection on- ›››...

  • Page 74: Airbag System

    This also applies to children. So that the effectiveness of the seat belt ten- Brief introduction sioner is not reduced and that removed parts Always maintain the greatest possible dis- do not cause any injuries or environmental tance between yourself and the front airbag.
  • Page 75 ››› seated correctly page 62, Correct position If you are not wearing a seat belt, or if you ● passengers. ● a control lamp for disabling/enabling the lean forward or to the side while travelling or front passenger airbag.

  • Page 76: Airbag Safety Instructions

    WARNING ● illuminates or flashes while the vehicle is The seat belts and airbags can only provide ● In an accident with airbag activation: moving. maximum protection if the occupants are ●...
  • Page 77 Never drive the vehicle if the loudspeakers ● ● Any damage to the original seat upholstery If you do not wear a seat belt, if you lean in the door panels have been removed, un- ● or around the seams of the side airbag units...

  • Page 78: Deactivating Airbags

    Do not attempt to modify components of provide their maximum protection, the pre- the airbag system in any way. scribed sitting position must always be main- tained with seat belts fastened while travel- The side and head airbags are managed ● ling.
  • Page 79 ››› ›››  page 14 light up airbag system: If you fit a rear-facing child seat to the front The warning lamp   is illuminated for Have the airbag system inspected imme- – – diately by a specialised workshop.

  • Page 80: Transporting Children Safely

    Objects between the passenger and the ››› passenger side airbag in Front airbags use a child seat or a seat belt. For safety rea- ● Child seats in the direction of travel (group sons, the child seat should be installed in the...

  • Page 81: Child Seats

    ››› page reached inside a parked vehicle, which could sition. If it has a fixed seat, place the seat as be fatal. far back as possible. WARNING Children who are less than 1.5 metres tall ●...
  • Page 82 ECE-R 44 or ECE- ● proval include a list of vehicle models for luggage compartment. R 129 on the seat (the letter E in a circle with which they can be installed. the test number below it). ●...
  • Page 83 Top Tether: The Top Tether belt is guided ● Make sure the support bracket is correctly over the back of the rear seat and attached to and safely installed. an anchor point with a hook. Anchor points are located at the back of the rear seat back- ›››...

  • Page 84: Emergencies

    Emergencies Emergencies ● Box spanner for wheel bolts* Note Jack* ● ● The first-aid kit and the fire extinguisher are not part of the vehicle's standard equip- ● Wire hook for pulling off the wheel cov- Self-help ment. er*/wheel bolt cap clip. ●...

  • Page 85: Tyre Repair

    A new bottle of sealant can be purchased at Do not use the tyre sealant in the following ● Replace the repaired tyre with the tyre mo- SEAT dealerships. cases: bility set as soon as possible. ● Take into account the separate instruction ●...
  • Page 86 Emergencies Contents of the tyre mobility system* Warning provided by tyre pressure moni- heating! Before switching on the air compres- toring system (it can also be integrated in sor again, let it cool for several minutes. the inflator tube). Tube for inflating tyres Check after 10 minutes of driving 12 volt connector Bottle of sealant...

  • Page 87: Changing The Windscreen Wiper Blades

    Self-help Changing the windscreen wiper Towing or tow-starting Clean the windscreen wiper blades and all ● windows regularly. blades General information ● The wiper blades should be changed once or twice a year. Changing the windscreen and rear Read the additional information carefully window wiper blades ›››...
  • Page 88 Emergencies For technical reasons, towing the following WARNING deactivated. If the vehicle has no power sup- vehicles is not allowed: ply or there is an electric system fault, the The risk of accidents is high when tow-start- engine must be tow-started to deactivate the ing, for example, the towed vehicle can easily ●...
  • Page 89 Self-help Bolt the anchorage to its limit to the left, in – WARNING ››› the direction of the arrow Fig. ● If the towline anchorage is not screwed in as far as the stop, there is a risk of the screw After use, unscrew the towline anchorage connection shearing off during towing (acci- and fit the cover back on the bumper.

  • Page 90: Fuses And Bulbs

    Emergencies Towing a vehicle equipped with auto- Fuses and bulbs Note matic gearbox ● If it is not possible to tow the vehicle in the Fuses normal way, or if it has to be towed further Certain restrictions must be observed when than 50 km (30 miles), it must be transported towing your vehicle.
  • Page 91 Fuses and bulbs Never use a fuse with a higher value. Only Positions not containing a fuse do not ap- Consumer/Amps ● ● replace fuses with a fuse of the same amper- pear in the following tables. Switch for lights, LSS and SMLS steer- age (same colour and markings) and size.
  • Page 92 Emergencies Consumer/Amps Consumer/Amps Consumer/Amps Right door electric windows Air blower Pressure Transducer, EPW Solenoid Valve, TOG Sensor, PWM fan, Variable Left Hand Lights Feed Double Water Pump Valve Distributor, Active Carbon Valve and Oil Pressure Valve (TSI) Horn Signal Heated rear-view mirrors Ignition coils (MPI and TSI) Heated seats control unit Towing Hook...

  • Page 93: Changing Bulbs

    Fuses and bulbs Depending on how equipped the vehicle is, Consumer/Amps CAUTION there are different sets of headlights and tail ● Remove the ignition key before working on lights: TH4 fan with AC or T5I for countries the electric system. Otherwise, a short circuit with moderate climate could occur.

  • Page 94: Halogen Headlights

    Emergencies Main beam Dipped beam headlight would vaporise as a result of the heat gener- ated by the bulb, they will be deposited on the reflector and will impair its surface. Halogen headlights Position of the bulbs Fig. 95 In the engine compartment: main Fig.

  • Page 95: Changing The Fog Light Bulbs

    Fuses and bulbs ››› Turn signal and DRL (daytime running Changing the fog light bulbs Unclip the retainer spring Fig. 97 – pressing inwards to the right. light)/side light Front fog light bulb Extract the bulb and fit the replacement so –...

  • Page 96: Changing The Tail Light Bulbs

    Emergencies Changing the tail light bulbs Changing bulbs Lever with a screwdriver in the notch ››› Fig. 99  (arrow). Subsequently, re- move the clips located on the edge of Tail light summary the grill with gentle leverage. Remove both bolts ...

  • Page 97: Changing The Interior Light Bulbs

    Fuses and bulbs Number plate light Changing the interior light Remove the lid, levering it with the flat side of a screwdriver into the recess bulbs ››› Fig. 100 Insert the flat part of a screwdriver into the – special slot and remove the bulb. Remove the bulb connector Interior light and front reading lights Remove the bulb holder, by turning it until...
  • Page 98 Emergencies First fit the glass with the fastening tabs – over the frame of the switch. Next press the front part until the two long tabs click on the support. Note Light sources cannot be replaced in LED cour- tesy lights. If the light does not work please go to an Official Service.
  • Page 100 Operation Dash panel. Fig. 105...

  • Page 101: Operation

    ......Depending on the equipment, Driver's seat heating control* Electric window controls* ..

  • Page 102: Instruments And Warning/Control Lamps

    Operation Instruments and warning/control lamps Instruments General instrument panel Instrument panel, on dash panel. Fig. 106 The layout of the instruments depends upon change up a gear or move the selector Speedometer. the model and the engine. lever to D (or lift your foot off the acceler- ›››...
  • Page 103 Instruments and warning/control lamps ›››  ● Service interval display page CAUTION CAUTION ›››  Second speed display page ● When the engine is cold, avoid high revs ● Never allow the rev counter needle ››› ›››  and heavy acceleration and do not make the Fig.
  • Page 104 Operation Speed warning The time can also be set via the button  At outside temperatures above +4°C ● function button in the Easy Con- Setup (+39°F), even when the “ice crystal symbol” When the speed setting is exceeded, this will ›››...
  • Page 105 Instruments and warning/control lamps Odometer Fault display ue lighting up and reach the upper zone. This is no cause for concern, provided the control If there is a fault in the instrument panel, the lamp does not light up on the instrument ...

  • Page 106: Warning And Control Lamps

    Operation Fuel level Warning and control lamps ● Engine oil pressure symbol with the  warning message STOP ENGINE OIL PRESSURE LOW! INSTRUCTION MANUAL Warning symbols Warning messages, Priority 2 (yellow) Read the additional information carefully ›››  page 36 If one of these faults occurs, the correspond- ing warning lamp lights up and is accompa- There are red warning symbols (priority 1)

  • Page 107: Introduction To The Easy Connect System

    Introduction to the Easy Connect system* Introduction to the Easy Stop the vehicle safely as soon as possible. Function buttons in the Page ● vehicle settings Park the vehicle away from traffic and en- Connect system* ● menu sure that there are no highly flammable ma- terials under the vehicle that could come into ›››...

  • Page 108: Communications And Multimedia

    Operation Communications and multi- media Steering wheel controls* General information The steering wheel includes a multifunction module from where it is possible to control the audio, telephone and radio/navigation functions without needing to distract the driver. There are two versions of the multifunction module: Audio system + telephone without voice ●...
  • Page 109 Communications and multimedia Operating the telephone and audio system without voice control (MID) Fig. 109 Controls on the steering wheel. Button Radio Media (except AUX) Telephone Navigation* Turn: Turn volume up/down Turn: Turn volume up/down Turn: Turn volume up/down Turn: Turn volume up/down Turn: Turn volume up/down Press: Mute Press: Mute...
  • Page 110 Operation Button Radio Media (except AUX) Telephone Navigation* Turn: Access call list / select ac- tion for incoming or current call Turn: Changes menu or memory (answer/reject/ignore/place on Turn: Next/previous preset Turn: Next/previous song Turn: No function on instrument panel hold/mute/switch to private Press: Acts on the MFD Press: Acts on the MFD...
  • Page 111 Communications and multimedia Button Radio Media (except AUX) Telephone Navigation Short press: switch to the previ- Radio/media functionality (ex- Search for last station ous song No function No function cept AUX ) Hold down: quick rewind Short press: switch to the next Radio/media functionality (ex- Search for the next station song...

  • Page 112: Multimedia

    Operation Multimedia Connectivity Box* / Wireless Charger* The operating description is located in the re- spective Instruction Manuals of the audio system or the navigation system. USB/AUX-INPort Note Your mobile device must support the Qi wire- less inductive charging interface standard for proper operation.

  • Page 113: Opening And Closing

    Opening and closing Opening and closing Duplicate keys Radio frequency remote control* If you need a replacement key, go to a Techni- cal Service with your vehicle identification Keys number. Set of keys WARNING ● An incorrect use of the keys can cause seri- ous injuries.
  • Page 114 Operation ››› Locking the vehicle  Fig. 114 SEAT recommends you ask a specialised If the vehicle cannot be unlocked or locked ● workshop to replace the battery. by using the radio frequency remote control, Unlocking the rear lid. Press button ...

  • Page 115: Central Locking System

    Opening and closing Spare remote control keys are available at – Locking system “Safe*” For the sake of the environment your Technical Service, where they must be – Selective* unlocking system Please dispose of your used batteries correct- matched to the locking system. ly and with respect for the environment.
  • Page 116 Operation Deactivation Note WARNING Rotate the key inserted in the lock cylinder For anti-theft security, only the driver door is No one should remain inside the vehicle if the twice towards the locking direction. fitted with a lock cylinder. “Safe” system is activated because opening the doors will not be possible in the event of To activate the system using the remote con- an emergency neither from the inside nor the...
  • Page 117 Opening and closing Unlocking all doors and the luggage com- Locking Central lock button* partment The doors will lock automatically if the speed The unlock button on the remote control of 15 km/h (9 mph) is exceeded. The rear lid must be pressed twice ...
  • Page 118 Operation Unlocking and locking the vehicle ● All doors can be unlocked separately from Keyless Access is a key-free locking and igni- inside the vehicle. Do this by pulling the door tion system to unlock and lock the vehicle with Keyless Access* release lever once.
  • Page 119 Opening and closing Unlocking and opening the doors (Keyless- door handles is touched. The following fea- without activating the “Safe” security system ››› tures are then available without having to Entry) page 114. use the vehicle key actively: ● Grip the driver door handle. In doing this, Unlocking and locking the rear lid ›››...
  • Page 120 Fig. 120 (arrow) of tact a specialised workshop. SEAT recom- the door handle until the windows and roof mends visiting a SEAT dealership for this. Sensors will again be enabled: have closed. Depending on the function set on the info- ●...

  • Page 121: Anti-Theft Alarm

    Opening and closing Childproof lock and clockwise for the right-hand side signal light located on the driver door will doors. flash along with the turn signals, indicating that the alarm and the locking security sys- Deactivating the childproof lock tem (double lock) have been turned on. Unlock the vehicle and open the door –...
  • Page 122 Operation Vehicle interior monitoring and anti- ● Ignition switched on with a non-validated Otherwise, the alarm will trigger for 30 sec. key. and the ignition will be blocked. tow system* ● Movements in the driving compartment Note Monitoring or control function incorporated (vehicles with a volume sensor).

  • Page 123: Boot Hatch

    Opening and closing The vehicle interior monitoring and anti-tow You can prevent the alarm from being trig- Note sensor (tilt sensor) are automatically switch- gered accidentally by switching off the vehi- ● If the vehicle is relocked and the alarm is ed on when the anti-theft alarm is switched cle interior monitoring and/or tow-away pro- activated without the volumetric sensor func-...

  • Page 124: Electric Windows

    Operation Electric windows Safety switch * WARNING Safety switch on the driver door can be ● Always close the rear lid properly. Risk of Opening and closing of the electric used to disable the electric window buttons accident or injury. in the rear doors.
  • Page 125 Opening and closing Convenience opening/closing dow closes with maximum force. The roll- If necessary, use the safety switch to disa- ● back function is now deactivated. ble the rear electric windows. Make sure that Use the convenience opening/closing func- they have been disabled. If more than 10 seconds pass, the window tion to easily open/close all the windows and will open fully when you operate one of the...

  • Page 126: Sunroof

    Operation One-touch opening Sunroof* the driver’s ( Driver ) or none ( Deactiva- Push down the window button briefly up to – the second position. The window opens Introduction WARNING fully. ● Take care when closing the sliding/tilting WARNING sunroof* and windows. There is a risk of suf- Resetting one-touch opening and closing If the sunroof is used negligently or without fering injury.
  • Page 127 Opening and closing Opening and closing the sunroof Adjusting the tilt position of the sunroof Before leaving the vehicle or in case of rain- ● fall, always close the sunroof. With the sun- Press the rear part of the button to the ●...
  • Page 128 Operation Stopping the automatic operation during the Anti-trap function of the panoramic WARNING opening or closing sliding sunroof Closing the sunroof without the anti-trap ● Press button again. function can cause serious injuries. The anti-trap function can reduce the risk of Always be careful when closing the sun- ●...

  • Page 129: Lights And Visibility

    Lights and visibility Lights and visibility Switching lights on and off Automatic lighting* Activation Read the additional information carefully Lights ›››  page 22 Rotate the switch to the  position, this – indication will light up. The driver is personally responsible for the Control lamps correct use and adjustment of the lights in all Deactivation...
  • Page 130 Operation Switching on the front fog lights* Do not put stickers on the windscreen in WARNING ● front of the sensor. This may cause disrup- Turn the switch from position   or  ● ● Never drive with daytime lights if the road tions or faults in the automatic lighting sys- to the first stop and pull it.
  • Page 131 Lights and visibility ● Move the turn signal lever up or down to If the Coming Home or Leaving Home func- el. The control lamp  flashes when the turn turn the right or left-hand parking lights on, tion is connected, the front side and dipped signals are operated, provided a trailer is cor- respectively.
  • Page 132 Operation Headlight range control ● If the ignition is switched on. Value Vehicle load status Note Driver only, luggage compartment full With trailer and maximum drawbar load. To activate the Coming/Leaving home func- ● tion, the rotary light switch must be in posi- If the vehicle load does not correspond to those shown in the tion ...

  • Page 133: Interior Lights

    Lights and visibility Interior and reading lights 2. Press the button to switch on the hazard Note ››› warning lights ● The battery will run down if the hazard Read the additional information carefully 3. Switch the ignition off. warning lights are left on for a long time, ›››...

  • Page 134: Visibility

    Operation Vanity mirror selected. This prevents the battery from dis- Note charging. There may be a vanity mirror on the rear of To avoid possible damage to the battery, an the sun visor with a cover automatic temporary disconnection of this function is possible, coming back on when WARNING normal operating conditions are re-establish-...

  • Page 135: Rear View Mirrors

    Lights and visibility Interior mirror with automatic anti-dazzle WARNING If you stop the vehicle with the windscreen ● function* wiper in position 1 or 2, it will automatically The rain sensor* may not detect enough rain change to a lower position speed. The set The anti-dazzle function is activated every to switch on the wipers.
  • Page 136 Operation Fold in the exterior mirrors after parking 3. Turn the knob to position R (right exterior Note mirror). (convenience function)* Before washing the vehicle with an automatic The Easy Connect system, the button and 4. Swivel the rotary knob to position the ex- car wash, fold in the exterior mirrors to avoid ...

  • Page 137: Seats And Head Restraints

    In- ● In vehicles with electric exterior mirrors, juries can be caused if the seat height is ad- the following points should be observed: if, justed without due care and attention. Adjusting the front seats due to an external force (e.g.

  • Page 138: Seat Functions

    Introduction Move the backrest until it engages properly – ››› WARNING Inappropriate use of the seat functions can Rear centre head restraint: release Fig. 129 Fitting the head restraint cause severe injuries. point. To mount the external head restraints, the ●...
  • Page 139 Make sure the seat cushion is dry prior to using the seat heater. Press the button  or  repeatedly until the desired intensity level is reached. Do not sit on the seat with clothing that is ● wet or damp. Deactivating Do not leave clothing that is wet or damp ●...
  • Page 140 The rear seat backrest is not engaged tention. when the red marking of the button Do no trap or damage seat belts when rais- ● visible. ing the backrest. ●...

  • Page 141: Transport And Practical Equipment

    1.5 kg. to reduce the risk of injury caused by a sud- Practical equipment den braking or by an accident. Storage pocket in the seat* Glove compartment Storage compartment under the front seats* Fig. 135 Storage pocket.

  • Page 142: Cigarette Lighter

    Operation Front drink holder* Electrical power socket Note ● The use of electrical appliances with the engine switched off will cause a battery dis- charge. ● Before using any electrical accessories, see ››› the instructions in page 220. Cigarette lighter* Fig.

  • Page 143: Luggage Compartment

    Transport and practical equipment Distribute the load evenly in the luggage – Using the lighter carefully. Carelessness or Never exceed the allowed axle weights or ● ● compartment. negligence when using the cigarette lighter allowed maximum weight. If said weights are can cause burns and serious injuries.
  • Page 144 ● Lift the variable floor using the handle, pull ››› it back and push the backrest of the rear seat Fig. 140 ● Attach the fastening loops until the movable part of the floor is resting the rear lid.

  • Page 145: Roof Carrier

    Bulky, heavy, long or flat loads have a neg- ● Never secure a child seat on the fastening ● ative effect on aerodynamics, the centre of rings. gravity and driving performance.
  • Page 146 ››› correctly boats on the roof. Suitable accessories can Note be acquired at SEAT dealerships. Always read the assembly instructions that come with the crossbars and the roof carrier Always secure the crossbars and the roof car- system carefully and keep them in the vehi- rier system properly.

  • Page 147: Air Conditioning

    Air conditioning Check attachments Air conditioning so as to maintain good visibility of everything outside. Once the cross bars and roof carrier system have been installed, check the bolted con- Heating, ventilation and cool- ● The maximum heat output required to de- nections and attachments after a short jour- frost windows as quickly as possible is only available when the engine has reached its...
  • Page 148 Operation prevent further damage and have it checked pose. Therefore, you should avoid obstruct- To ensure correct operation, the grilles on ● by a specialised workshop. ing these slots with any kind of object. both sides of the screen must not be obstruc- ted.
  • Page 149 Air conditioning Air outlets Air vents. Fig. 144 To ensure proper heating, cooling and venti- Air recirculation  Press button , the switch's lamp will ● lation in the vehicle interior, the air vents light up, indicating that air recirculation in- ›››...

  • Page 150: Heating And Fresh Air

    Operation WARNING Note button is on, the “Air recirculation” function is automatically activated in order to cool the In air recirculation mode, no cold air from the ● When engaging reverse gear, the air recir- vehicle rapidly using less energy and its func- outside enters the vehicle interior.
  • Page 151 Air conditioning Air distribution Functions Defrosting the windscreen Control for setting the flow of air in the re- Turn the temperature selector ● Ventilating the vehicle interior ››› quired direction. Fig. 145 clockwise to reach the maxi- The desired temperature inside the vehicle mum temperature.

  • Page 152: Manual Air Conditioning

    Operation heating system functions correctly (except in vehicles fitted with additional heating*). Manual air conditioning* Controls Air conditioning controls on the dash Fig. 146 panel. ››› Temperature selector page 151 Heated rear window.  miliarise yourself with the correct operation of the heating and ventilation system, includ- Blower control.
  • Page 153 Air conditioning Functions This way, if the outside humidity is extreme, ● Rotate the temperature control to the de- the air conditioning prevents the misting of sired level of comfort. Interior heating the windows and therefore, comfort is im- ● Close the central outlets.

  • Page 154: Climatronic

    Operation Climatronic* General notes Climatronic: controls. Fig. 147 Climatronic description Switching off the Climatronic Read the additional information carefully ›››  page 39 ››› Cooling only works if the following conditions ● Set fan power to zero Fig. 147 are met: press button .
  • Page 155 Air conditioning ● Adjust the vents so that the air flow is di- this range the temperature is regulated auto- The temperature is regulated automatically. rected slightly upwards. matically. If a temperature below +16 °C The air output is increased from vents ›››...

  • Page 156: Driving

    Operation Driving could be engaged and vehicle steering would  It lights up yellow not work. The 12-volt battery Take the vehicle for a short run Address was disconnected at 15-20 km/h (9-12 mph). Note and has been recon- nected. Introduction The ignition of the vehicle being towed must be switched on to prevent the steering wheel...

  • Page 157: Starting And Stopping The Engine

    Driving Electromechanical steering Starting and stopping the en- Note In vehicles with electromechanical steering, gine Failure to heed the control lamps and corre- the assisted steering function automatically sponding text messages when they light up adjusts according to vehicle speed, steering may result in damage to the vehicle.
  • Page 158 (ignition key position The engine can only be started using a genu- Starting ine SEAT key with its correct code. The engine is started when the key is in this Move the gearbox lever to the neutral posi- –...
  • Page 159 The engine can only be started using a genu- warning lamp goes out. Never leave the vehicle unattended if the ine SEAT key with its correct code. ● engine is running. Starting a diesel engine after the fuel tank Move the gearbox lever to the neutral posi- –...
  • Page 160 Operation Starter button* start it using the battery of another vehicle. brake operation cannot be performed, risk of Please observe and follow the notes on the accidents and serious injury may exist. ›››  page 57, How to jump start. ●...
  • Page 161 The ignition is switched off automatically ample, the battery of the vehicle key button when the vehicle is stopped and the auto- is very low or flat: matic engine shutdown is active, if: ● The driver's seat belt is not fastened,...

  • Page 162: Starting The Engine

    Operation Note Starting the engine with the starter but- If the engine is cold, avoid high engine ● Step ››› speeds, pushing the engine too hard and rap- page 158. ● Before leaving the vehicle, always discon- id acceleration. nect the ignition manually and, if appropri- ›››...

  • Page 163: Braking And Parking

    Driving button and the lighting START ENGINE STOP Switch off the engine with the starter CAUTION Step changing from flashing to fixed will depend ››› button page 158. If the engine is made to work hard for a long on engine characteristics. Upon switching the time, it may overheat after being switched Press and hold the brake pedal until the step ignition off with the...
  • Page 164 Operation of your brake pads checked by technical serv- the brakes to overheat and the braking dis- WARNING ices more frequently than recommended in tance will increase. Apply and then release ● If the brake warning lamp does not go out the Maintenance Programme.
  • Page 165 Driving Applying the handbrake ● If the vehicle is parked facing uphill, turn CAUTION the front wheels so that they point away from Pull the handbrake lever up firmly – Always apply the handbrake before you leave the kerb. ››› Fig.

  • Page 166: Braking And Stability Systems

    Operation Braking and stability systems Electronic Stability Control (ESC)* The control lamp  has the following func- tions: The ESC reduces the risk of skidding by brak- Electronic Stability Control (ESC)* ing the wheels individually. ● It flashes whilst driving when the ASR/ESC is activated.
  • Page 167 Driving When the ASR is off, the warning lamp lights should occur in the ABS because the ASR op- CAUTION up . The ASR should normally be left on. erates in conjunction with the ABS. For fur- ● To ensure that the ESC works correctly, all ›››...
  • Page 168 Operation The control lamp  lights up. For vehicles button and the Setup ESC System  and tyres) may affect the operation of the with a driver information system*, the driver function buttons. ABS and ASR. will be shown the electronic stability control (ESC) option: sport.
  • Page 169 Driving in the speed of the driven wheels of approxi- a standstill, the hazard warning lights will CAUTION mately 100 rpm/min caused by a partially then come on and the brake lights will re- Modifications to the vehicle (e.g. to the en- slippery road surface.
  • Page 170 Operation pressure to this wheel. The driver is made The vehicle can still be braked in the normal WARNING aware of this control process by a pulsating way, without the ABS function. Take the vehi- ● Before opening the bonnet, read and ob- of the brake pedal and audible noise.
  • Page 171 Driving grip on the front axle, resulting in understeer ● besides having a gear engaged or being in tance is increased considerably when the or “lengthening” of the trajectory. neutral for manual gear change and with the brake servo is not active. selector lever at position S, D or R for an au- The XDS system can detect and correct this ●...

  • Page 172: Manual Gearbox

    Operation Manual gearbox Information regarding the “cleanliness” of When changing gear, you should always ● the diesel particulate filter depress the clutch fully to avoid unnecessary wear and damage. Driving with manual gearbox The exhaust system manager detects that the Do not “slip”...

  • Page 173: Run-In And Economical Driving

    If the engine is run in gently, its life will be in- the design, choice of materials and manufac- creased and its oil consumption reduced. ture of your new SEAT. ● Reduction of the quantity of thinner in the protective wax for cavities.
  • Page 174 Operation ● Use of solvent-free adhesives. tyres; emissions and fuel consumption are tant emissions are also especially high dur- reduced to zero (disconnection due to iner- ing this initial warm-up phase. It is therefore Use of CFC-free coolants in cooling sys- ●...

  • Page 175: Tion System

    If the tyre pres- ing or the seat heaters*. sure is just one bar (14.5 psi/100 kPa) too Introduction low, fuel consumption can increase by as Note much as 5%.

  • Page 176: Driving Tips

    Operation Engine management*  Engine pre-heating/fault system*  For engine oil changes, do not replenish – ››› with too much engine oil page 237, Top- ping up engine oil. This warning lamp monitors the engine man- The warning lamp lights up to show that the agement system for petrol engines.

  • Page 177: Driver Assistance Systems

    Applying the brakes carefully Description and operation several times will remove the moisture and SEAT importers and distributors will gladly restore the full braking effect. provide information about the technical prep- The Start-Stop system helps save fuel and re-...
  • Page 178 The Start-Stop system must always be ● The driver door must be closed. switched off when driving through flooded Additional information related to the auto- The driver must have their seat belt fas- ● ››› areas page 177.
  • Page 179 Driver assistance systems ● The interior temperature selected for the air Note Note conditioner has not yet been reached. You can control whether the engine should ● In vehicles with an automatic gearbox, if the ● The interior temperature is very high/low. switch off or not by reducing or increasing the selector lever is placed in position D, N or S brake force applied.

  • Page 180: Cruise Control System (Ccs)

    Operation Cruise control system (CCS)* Control lamp Note  The system is automatically switched on each Lights up Operation time the engine is deliberately stopped dur- The cruise control system (CCS) is switched on and ac- ing a stopping phase. The engine will start tive.
  • Page 181 Driver assistance systems Operating the cruise control system* ● If the selector of the dual clutch gearbox to drive at a constant speed maintaining the ® is disengaged from the D/S position. safety distance. Read the additional information carefully ● Do not use the cruise control in heavy traf- ›››...

  • Page 182: Speed Limiter

    Operation Speed limiter The speed limiter is switched off. The to- aquaplaning, snow, ice, leaves, etc. You tal mileage is displayed. should use the speed limiter function only when traffic, road and weather conditions al- Display messages and warning and Warning and control lamp low it to be used safely.
  • Page 183 Driver assistance systems Operate the speed limiter On the left of the steering column: On the left of the steering column: Fig. 155 Fig. 156 control and buttons to operate the speed lim- third lever for operating the speed limiter. iter.
  • Page 184 Operation ››› Position of the turn signal lever Fig. 155 Function Effect ››› or the third lever Fig. 156 Press button on the turn signal lever or move the third lever into posi- The speed is limited to the set speed as soon as the speed Switching the speed limiter on again tion .

  • Page 185: Area Monitoring System (Front Assist) Includ- Ing City Emergency Braking And Pedestrian Monitoring

    Driver assistance systems Switch the speed limiter off temporarily by Area monitoring system (Front The warning moment varies depending on pressing down the accelerator (kick-down) the traffic situation and driver behaviour. Assist) including City emergen- If the accelerator is pressed right down (kick- cy braking and pedestrian Advance warning down) and the set speed is exceeded be-...
  • Page 186 SEAT recommends visiting a SEAT dealership. cle. . ● Adapt your speed and safe distance to the...
  • Page 187 Driver assistance systems Radar sensor to the presence of metallic objects (e.g. rails mends visiting a SEAT dealership for this pur- on the road or sheets used in road works). pose. The area in front of and around the radar sen- ●...

  • Page 188: System Limitations

    If the radar sensor takes a heavy knock, for example in a rear collision. Select the corresponding menu option us- ● SEAT recommends driving with the function ing the button for the driver assistance sys- ● If it intervenes several times unnecessarily.
  • Page 189 Driver assistance systems City Emergency braking function ● Pressing the accelerator all the way down. If the system detects a possible collision with a vehicle in front of it, the vehicle prepares If the Front Assist is switched off or dam- ●...
  • Page 190 155. ● During driving, the City Emergency braking SEAT recommends always having the pedes- function does not react to people or animals trian monitoring function connected. The ex- or vehicles crossing your path or which ap- ceptions set out for the Front Assist system proach you head-on in the same lane.

  • Page 191: Adaptive Cruise Control Acc

    ACC function reduces speed until it is the checked. SEAT recommends visiting a SEAT time. If the pedestrian monitoring system is- same as the vehicle ahead, and maintains dealership for this.
  • Page 192 Never use the ACC when driving off-road or ist knowledge and special tools. SEAT recom- on unpaved roads. The ACC has been de- mends visiting a SEAT dealership for this pur- signed for use on paved roads only. pose. The ACC does not react on approaching a ●...
  • Page 193 Driver assistance systems Radar sensor Vehicle ahead detected. The ACC is active If the symbol is white: the ACC is ac-  and adjusts speed. tive. Distance level 2 programmed by the driv- A vehicle in front has been detected. The ACC adjusts speed and distance from the vehicle in front.
  • Page 194 Operation presence of metallic objects (e.g. rails on the mends visiting a SEAT dealership for this pur- road or sheets used in road works). pose. The area in front of and around the radar sen- ● Clean away the snow with a brush and the...
  • Page 195 ››› sition Fig. 165 (engaged). At this point, In vehicles with SEAT Drive Profile, the driving The instrument panel display modifies the the ACC deactivated message will be dis- profile selected can affect the ACC’s accelera- distance level. You can choose between 5 played and the function will be totally deacti- ›››...
  • Page 196 ● Clean the sensor. ● If the ESC is controlling. Note  ACC: currently not available. Gradient too If the driver is not wearing his/her seat ● The programmed speed is erased once the ● steep belt. ignition or the ACC are switched off.
  • Page 197 Driver assistance systems  ACC: currently not available. Intervention which means exceeding or not reaching the The adaptive cruise control (ACC) has a func- of stability control permissible engine speed. The ACC switches tion that helps avoid overtaking while driving itself off.
  • Page 198 Operation Special driving situations ● On roads with several lanes, when other ve- hicles are driving more slowly in the overtak- ing lane. In this case, slower vehicles will be overtaken on the right. ● In case of heavy rain, snow or spray, as the vehicle in front might not be detected proper- ly or, in certain circumstances, might not be detected at all.
  • Page 199 Driver assistance systems Driving through a bend Other vehicles changing lanes When the ACC stops the vehicle (e.g. traffic jam), the ACC ready to start message On entering or exiting bends, the radar sen- Vehicles changing lanes a short distance will appear on the instrument panel display.

  • Page 200: Seat Drive Profile

    SEAT dealership. Depending on the equipment fitted in the ve- If laser sensor operation is impaired, due to hicle, SEAT Drive Profile can operate on the heavy rain, spray, snow or mud, the ACC is following functions: WARNING deactivated temporarily.
  • Page 201 In vehicles with Climatronic, this can operate You can select the required mode either by in eco mode, especially restricting fuel con- When operating SEAT Drive Profile, pay atten- repeatedly pressing the button MODE tion to all traffic: doing otherwise could cause sumption.

  • Page 202: Fatigue Detection (Break Recommendation)

    199 mode has been se- Fig. 171 On the instrument panel display: fa- lected in SEAT Drive Profile*, and the acceler- ● In some situations, the system may incor- tigue detection symbol. ator is pressed beyond a hard point, the en- rectly interpret an intended driving manoeu- vre as driver tiredness.

  • Page 203: Parking Aid

    The assistance systems are not a opened the door. Conditions of operation replacement for driver awareness. When in-...
  • Page 204 SEAT Official Service or in a specialised with external ultrasound sources, such as – workshop. Certain surfaces of objects and garments cleaning vehicles or other vehicles;...
  • Page 205 Driver assistance systems Parking system plus* As you approach the obstacle, the time inter- 0.60 m val between the audible warnings will be re- 1.60 m duced. When you reach around 0.30 m the 0.60 m warning will be constant: Do not continue to ›››...
  • Page 206 Operation Manual disconnection of Parking Aid Change from reduced view to full view be displayed and the segments will be shown on the left side of the screen Press the  button again. Engage reverse gear or turn the selector ●...
  • Page 207 Segments of the visual indication Front volume* Moreover, with the SEAT Media System Plus/Navi System radios, a yellow trail indi- Volume in the front and rear area. cates the vehicle's expected journey based on the steering wheel angle.

  • Page 208: Rear Assist "Rear View Camera

    Operation Error messages sensors will not be activated when reverse screen in a different, vague manner. The per- gear is engaged, when the selector lever is ception of distances is also distorted by this When the Parking Aid is activated or when it turned to position R or when the button ...
  • Page 209 Familiarising yourself with the system To change these settings: To familiarise yourself with the system, the orientation lines and their function, SEAT rec- Park the vehicle in a safe place. ● ommends practising parking and manoeu- ●...
  • Page 210 Operation Parking and manoeuvring with the too much traffic or in a car park when there ● The camera will stop transmitting images are good weather and visibility conditions. above the speed of 15 km/h (9 mph) with re- rear assist verse engaged.

  • Page 211: Towing Bracket Device

    Note The towing bracket device fitted to your vehi- green ends approximately 2 m behind Towing the vehicle with the detachable ball cle, be it factory-fitted or a genuine SEAT ac- the vehicle on the road surface. ››› joint page...
  • Page 212 Operation Placing in standby position Step 1 Depending on the country or version, the towing bracket device's detachable ball joint Turn the key in the direction of arrow ● is located: til the part of the key with the holes reaches ›››...
  • Page 213 Towing bracket device Standby position Thus adjusted, the detachable ball is ready ing following the direction of arrow until it ››› for installation. engages audibly Lever turns automatically in the direction CAUTION of arrow upwards, and the release bolt The key cannot be removed or turned in the moves outwards (the red and green part will standby position.
  • Page 214 Operation Assembling the detachable ball - Step Checking proper attachment ● Remove the key in the direction of arrow ● Place cover in the lock in the direction ››› ››› Fig. 184 of arrow ● Check that the detachable ball is secure ›››...
  • Page 215 Towing bracket device Releasing the detachable ball ● Insert key into the lock in the direction The towing bracket device should only be ● ››› of arrow Fig. 187. used if the detachable ball has been properly Grip the detachable ball from below. ●...

  • Page 216: Trailer Towing

    Operation Trailer towing duced by 10% for every further 1000 m (or Keep the detachable ball in the standby po- ● part thereof). The gross combination weight sition, with the key inserted into the box is the actual weight of the laden vehicle plus while you place it facing downwards with the What do you need to bear in mind the actual weight of the laden trailer.
  • Page 217 Towing bracket device Exterior mirrors Hitching and connecting the trailer ››› Key of the Schematic diagram Fig. 189: Check whether you can see enough of the Meaning road behind the trailer with the standard rear vision mirrors. If this is not the case, you Unassigned should have additional exterior mirrors fitted.
  • Page 218 Operation Trailer maximum electricity consumption Ball coupling of towing bracket de- Driving with a trailer vice* Brake lights (total) 84 Watts The ball coupling is provided with instruc- Turn signal, on each side 42 Watts tions on fitting and removing the ball cou- Side lights (total) 100 Watts pling of the towing bracket.
  • Page 219 Towing bracket device Safety lug ● The trailer is connected electrically to the Note towing vehicle by the trailer connector. ››› The safety lug Fig. 190 is used to hook ● If there is any fault in the trailer's lighting, ●...
  • Page 220 Operation Retrofitting a towing bracket* permissible speed in an unfavourable road, The attachment points for the towing bracket weather or wind conditions. This applies es- are on the lower part of the vehicle. pecially when driving downhill. The distance between the centre of the ball You should always reduce speed immediately coupling and the ground should never be if the trailer shows the slightest sign of snak-...
  • Page 221 Note ● SEAT recommends that the towing hooks be fitted at a specialised workshop. Consult your SEAT dealer in case additional modifica- tions to your vehicle are necessary. Due to the specific design of the exhaust, ● the fitting of a conventional towing hook is not recommended for some sportier versions.

  • Page 222: Advice

    Advice Advice Modifications Despite a continuous observation of the mar- ket, SEAT is not able to assess the reliability, safety and suitability of parts that SEAT has Modifications must always be carried out ac- Care and maintenance not approved. For this reason, SEAT cannot cording to our specifications.

  • Page 223: Care And Cleaning

    A SEAT Official Service and specialised work- shop will be able to inform you about options The best way to protect your vehicle against WARNING...

  • Page 224: Care Of The Vehicle Exterior

    Advice After washing, the brakes could take some WARNING For the sake of the environment time to respond as the brake discs and pads ● Car-care products can be toxic. Because of ● When purchasing car care products, try to could be wet, or even frozen in winter.
  • Page 225 Care and maintenance freezing. Apply silicone spray to the rubber After washing, avoid sudden and sharp – For the sake of the environment seals. braking. “Dry” the brakes by braking sever- To protect the environment, the vehicle ››› al times page 161.
  • Page 226 Advice Vehicle paint maintenance ● To remove ice or snow from the stickers do CAUTION not use window scrapers or ice scrapers. To prevent damage to the paintwork: Regular waxing protects the paintwork. ● Do not polish the stickers. ● Do not use polishes and hard wax on pain- You need to apply wax to your vehicle if water Do not use dirty cloths or sponges.
  • Page 227 Care and maintenance Removing snow Caring for rubber seals will also prevent pre- The heating element for the rear window is ● mature ageing and leaks. The doors will be located on the inner side of the window. To Use a small brush to remove snow from the –...
  • Page 228 Advice Steel wheel rims Alloy wheels require regular attention to pre- WARNING serve their appearance. If road salt and brake Do not apply underseal or anti-corrosion Clean steel wheel rims regularly using a dust are not often removed, the aluminium –...

  • Page 229: Caring For The Vehicle Interior

    Care and maintenance have the engine cleaned. On commissioning If this does not provide satisfactory results, – ried out only by a specialised workshop or a this work, ensure that all surfaces, seams, use a special solvent-free plastic cleaning petrol station. joints and components in the engine com- product.
  • Page 230 (e.g. a micro-fibre cloth) and er has a certain sensitivity to grease and dirt, the seat upholstery. Make sure they are vacuum off any residue once the surface is etc. so a degree of care is required in every- closed.
  • Page 231 – Dust and grit in the pores and seams can scratch and damage the surface. If the car is Do not roll the seat belt up until it is dry. – left standing in the sun for long periods, Al-...

  • Page 232: Checking And Refilling Levels

    Advice Checking and refilling levels If, in exceptional circumstances, you have (up to one minute). This is due to the fact that ● to carry a spare fuel canister, please observe the fuel system has to purge itself of air be- the following: fore starting.
  • Page 233 If this is not available: super 95 oc- Group Fuel Additives for petrol engines”. gine. tane petrol, with a slight decrease in power. These additives can be bought at SEAT deal- In those countries where unleaded petrol is ● ers, where information on how to use them...

  • Page 234: Working In The Engine Compartment

    ● Never touch the radiator fan. It is tempera- are under constant development. SEAT pro- ture controlled and could start automatically, vides a constant flow of information to Tech- even when the engine has been switched off nical Services concerning modifications.
  • Page 235 Checking and refilling levels Never cover the engine with additional in- Never accelerate with a gear engaged CAUTION ● – sulating materials such as a blanket. Risk of without taking the necessary precau- When topping up service fluids, make sure fire! tions.
  • Page 236 Advice Release the bonnet stay and replace it in its – Wait until no more steam, smoke or coolant If you notice that the bonnet latch is not se- ● ● support. is emitted from the bonnet, then carefully cured when the vehicle is moving, stop the open the bonnet.

  • Page 237: Engine Oil

    Checking and refilling levels Checking levels Diagram for the location of the various ele- Fig. 192 ments. Engine oil From time to time, the levels of the different tioned above. These operations are descri- ››› fluids in the vehicle must be checked. Never bed in page 232.
  • Page 238 Advice diesel engines together, it means that the oil ● Avoid mixing it with oil for fixed service in- Only VW 507 00 engine oil, with reduced ash can be used for both types of engines. tervals. formation, may be used in diesel engines equipped with particulate filter.
  • Page 239 Checking and refilling levels If the warning lamp flashes although the oil Read the additional information carefully CAUTION ›››  level is correct, stop driving. Do not even run page 45 If the oil level is above the area do not the engine at idle speed! Obtain technical as- start the engine.

  • Page 240: Cooling System

    Advice ● lamp lights up or flashes while the  For the sake of the environment Wash your skin thoroughly if it comes into ● vehicle is running, and three acoustic warn- contact with engine oil. The oil level must never be above area ›››...
  • Page 241 Checking and refilling levels Cover the coolant expansion tank cap with – Never open the bonnet if you can see or safe place out of reach of children. Failure to ● a cloth and carefully unscrew it to the left hear steam or coolant escaping from the en- comply could result in poisoning.

  • Page 242: Brake Fluid

    You can buy VW 501 14 standard brake fluid display on the instrument panel will warn you If the fluid in the expansion tank is not pur- ● in a SEAT dealership or a SEAT Official Serv- ››› page 104.

  • Page 243: Windscreen Washer Reservoir

    The brake pads and brake fluid must be col- cautiously. lected and disposed of according the applica-  Fires, sparks, open flames and smoking are pro- ble regulations. The SEAT Technical Service When working in the engine compartment, hibited! ● network has the necessary equipment and always observe the safety warnings ...
  • Page 244 Advice The control lamp lights up when the igni-  seek medical care immediately. Neutralise Never charge a frozen battery, or one which ● tion is switched on. It should go out when the any acid splashes on the skin or clothing has thawed.

  • Page 245: Wheels

    ● Keep grease, oil and fuel off the tyres. – be replaced. Contact a specialised workshop. Genuine SEAT batteries meet the mainte- Inspect the tyres regularly for damage nance, performance and safety specifications – (cuts, cracks or blisters, etc.). Remove any of your vehicle.
  • Page 246 Advice Concealed damage Tyre pressure monitoring system Tyre pressure Damage to tyres and rims is often not readily The correct tyre pressure is especially impor- visible. If you notice unusual vibrations or the tant at high speeds. The pressure should vehicle pulling to one side, this may indicate therefore be checked at least once a month that one of the tyres is damaged.
  • Page 247 Wheels Tyre useful life pending on the make, there will be 6 to 8 of Unbalanced wheels should be rebalanced, as them evenly spaced around the tyre. Mark- they otherwise cause excessive wear on ings on the tyre sidewall (for instance the let- steering, suspension and tyres.
  • Page 248 Those approved For the sake of the environment 2016. by SEAT are specially matched to the charac- Old tyres must be disposed of according to teristics of the vehicle and make a major con- We recommend that work on tyres and the laws in the country concerned.
  • Page 249 Wheels ● The wheels of one axle are under more extra care. Refit the normal road wheel as CAUTION pressure (for example, driving with a trailer or soon as possible. The prescribed tightening torque for wheel on steep slopes). bolts for steel and alloy wheels is 120 Nm. ●...

  • Page 250: Spare Wheel (Temporary Spare Wheel)

    Extraction of the spare wheel in vehicles The temporary spare wheel is stored under with SEAT SOUND 6 speakers (with subwoof- ● No other type of tyre (normal summer or winter tyre) may be fitted on the compact...

  • Page 251: Winter Service

    Wheels Winter service In some countries, vehicles which can exceed the speed rating of the fitted tyre must have an appropriate sticker in the driver's field of Winter tyres view. These stickers are available from your technical service. The legal requirements of In winter conditions winter tyres will consid- each country must be followed.

  • Page 252: Technical Data

    Technical data Technical data Abbreviations used in the technical specifi- cations section Technical specifications Kilowatt, engine power measurement. Pferdestärke (horsepower), formerly used to denote engine power. Important information Revolutions per minute - engine speed. Important Newton metres, unit of engine torque. The information in the vehicle documentation Cetane number, indication of the diesel Chassis number.

  • Page 253: Information On Fuel Consumption

    Technical specifications Vehicle data sticker by certified EU laboratories, according to the WARNING legislation in force at the time (for more infor- The data sticker is placed on the inside of the ● Please note that the centre of gravity may mation, see the Publications Office of the Eu- spare wheel well, in the boot and on the rear shift when transporting heavy objects;...

  • Page 254: Wheels

    Technical data ››› Drawbar loads Wheels wrench . The tightening torque for steel and alloy wheels is 120 Nm. The maximum permitted drawbar load on the ball joint of the towing bracket must not ex- Tyre pressure, snow chains, wheel WARNING ceed 75 kg.

  • Page 255: Engine Data

    Fuel 55 (75)/6,200 95/3,000-4,300 3/999 Super 95 RON/Normal 91 RON Slight power loss. Outputs and weights IBIZA Top speed (km/h) Acceleration from 0-80 km/h (seconds) Acceleration from 0-100 km/h (seconds) 14.7 Maximum authorised weight (kg) 1,510-1,610 Weight in running order (with driver) (kg)
  • Page 256 Fuel 70 (95)/5,000-5,500 175/2,000-3,500 3/999 Super 95 RON/Normal 91 RON Slight power loss. Outputs and weights IBIZA Top speed (km/h) Acceleration from 0-80 km/h (seconds) Acceleration from 0-100 km/h (seconds) 10.9 Maximum authorised weight (kg) 1,550-1,660 Weight in running order (with driver) (kg)
  • Page 257 Fuel 85 (115)/5,000-5,500 200/2,000-3,500 3/999 Super 95 RON/Normal 91 RON Slight power loss. Outputs and weights IBIZA Top speed (km/h) 195 (V) Acceleration from 0-80 km/h (seconds) Acceleration from 0-100 km/h (seconds) Maximum authorised weight (kg) 1,580-1,690 Weight in running order (with driver) (kg)
  • Page 258 81 (110)/5,800 155/3,800-4,000 4/1,598 Super 95 RON/Normal 91 RON Slight power loss. Outputs and weights IBIZA Top speed (km/h) Acceleration from 0-80 km/h (seconds) Acceleration from 0-100 km/h (seconds) Maximum authorised weight (kg) Weight in running order (with driver) (kg)

  • Page 259: Dimensions

    Technical specifications Dimensions Fig. 200 Dimensions. Fig. 200 IBIZA Front and rear projections (mm) 796/699 Wheelbase (mm) 2,564 Length (mm) 4,059 Front/rear track width (mm) 1,525/1,505 Width (mm) 1,780 Height at kerb weight (mm) 1,444 This data will change depending on the type of wheel rim. Values for wheel 185/70 R14 ET38.

  • Page 261: Index

    Automatic lighting ......127 Adjusting the seat ......135 control lamp .
  • Page 262 ......52 seat belts ......229 Changing settings steel wheel rims .
  • Page 263 ....238, 239 seat belt tensioners ..... . 71 Coming Home Function .
  • Page 264 Index menu ........28 Electrical power socket ....140 Running in .
  • Page 265 ......235 Fault in electronic differential lock (EDL) Front seat temperature display ..... . 31 control lamp .
  • Page 266 ....... 148 SEAT Drive Profile ..... . . 198 starting the engine .
  • Page 267 Index Keys Light switch ......22 Mobile ........220 locking and unlocking .
  • Page 268 ....... 59 seat belts ......71 cleaning .
  • Page 269 ....... 125 Seat belts ....... . 67 lamps .
  • Page 270 Transporting children ..... . . 78 Tightening torque Unfasten the seat belt ..... . 12 Transporting items wheel bolts .
  • Page 271 Window wiper blade ....24, 132 for seat belts ......67 Vehicle battery .
  • Page 272 Index XDS ........168...
  • Page 275 SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to under- stand, that at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no right at all may derive based on the data, drawings and descriptions in this current handbook.
  • Page 276 SEAT recommends SEAT recommends SEAT GENUINE OIL Castrol EDGE Professional...

Table of Contents