External Audio Source Connected To The Aux-In Multimedia Socket; External Audio Source With Bluetooth - Seat Tarraco 2020 Owner's Manual

Cause and actions to
Error message
take
Due to the large number of different data storage de-
vices and various iPod™, iPad™ and iPhone™ genera-
tions available, it is not possible to guarantee fault-
free operation of all functions described here.
Disconnecting
Data media be prepared for disconnection.
From the main Media menu, press the SET-
●
button to open the Media Settings
TINGS
menu or press the infotainment button
then press Settings , to open the System
menu.
settings
Press the
● Remove safely
dropdown menu appears with the following
options: SD1 Card, SD2 Card*, USB1 and
USB2*. Pressing the corresponding function
button disables it.
Now the data storage device can be dis-
●
connected.
Note
Do not connect an external media player
●
at the same time to play music via Blue-
®
tooth and via the USB port
fotainment system, as this could cause
playback limitations.
If the external player is an Apple™ device,
●
it cannot be simultaneously connected by
USB and by Bluetooth ®
208
If a connected source is not recognized,
●
disconnect and reconnect it. If the data
cannot be played, the corresponding indi-
cation will be displayed.
External audio source connected to
the AUX-IN multimedia socket
Depending on the equipment and country
there may be an AUX-IN multimedia socket
›››
page
and

The connected external audio source cannot
be operated with the infotainment system's
controls.
function button. A
Connecting an external audio source to
the AUX-IN multimedia socket
Connect the external audio source to the
●
AUX-IN multimedia socket.
Start playback on the external audio
●
source.
In the MEDIA main menu, press the
●
function button and select
The playback volume of the connected ex-
with the In-

ternal audio source should be adjusted to the
volume of the other audio sources
›››
page
.
Infotainment System

244.
SOURCE
.
AUX
176.
Information on operating an external au-
dio source connected to the AUX-IN multi-
media socket
Operation Effect
Selection of another au- The external audio
dio source from the Info- source continues to run in
tainment system. the background.
Stopping playback on The infotainment system
the external audio remains in the AUX menu.
source.
Remove the connector The infotainment system
from the AUX-IN multi- remains in the AUX menu.
media jack.
Note
Please read and observe the manufac-
●
turer's instruction manual for the external
audio source.
Interference noise may be heard if the ex-
●
ternal audio source is powered from the 12-
volt power socket of the vehicle.
Connect an external audio source
via Bluetooth ®
®
In the Bluetooth Audio mode, audio files that
are playing on a device connected by Blue-
tooth can be listened to on the infotainment
system.