If you detect any fault in the electrical
●
system or in the towing bracket, contact a
specialised workshop and ask them to
check it.
If the ball has a diameter of less than 49
●
mm at any one point, do not use the towing
bracket under any circumstances.
CAUTION
If you clean the vehicle with high-pressure
or steam devices, do not point the jet di-
rectly towards the retractable tow hook or
the trailer power socket, as this may dam-
age the joints or remove the grease neces-
sary for lubrication.
Note
At extremely low temperatures, the tow
hook may be impossible to operate. In this
case, place the vehicle in a warmer loca-
tion (for example, a garage).
Fitting a bicycle carrier on the re-
tractable towbar
The maximum allowed weight of the carrier
system, including the load, is 75 kg. The carri-
er system should not protrude more than 700
mm backwards from the spherical head. On-
ly carrier systems on which up to 3 bikes can
be mounted are allowed. Heavier bicycles
340
Driving
must be mounted as close to the vehicle as
possible (tow hook).
WARNING
The incorrect use of the tow hitch with a bi-
cycle rack mounted on the tow hook can
cause accidents and injury.
Never exceed the maximum weight or the
●
limits indicated above.
The bicycle rack may not be mounted to
●
the neck of the hook below the ball be-
cause, due to the shape of the neck and
depending on the rack model, the rack
could be incorrectly mounted on the vehi-
cle.
Always read and take the manufacturer
●
assembly instructions into account.
CAUTION
If the maximum weight and limits indicated
above are exceeded, the vehicle may suf-
fer considerable damage.
Never exceed the values indicated!
●
Note
SEAT recommends removing, as far as pos-
sible, all removable parts of the bicycles
before setting off. These parts include, for
example, baskets and saddlebags, child
seats or batteries. This improves aerody-
namics and the centre of gravity of the rack
system.
Retrofitting a towing bracket
Description
Limits and attachment points for ret-
Fig. 304
rofitting a towing bracket.
SEAT recommends that towing brackets be
retrofitted at a specialised workshop. For