Xilinx Virtex-7 FPGA VC7203 Getting Started Manual page 30

7. A Customize IP window opens. In the Protocol Definition tab, change LineRate (Gbps) to
12.5, then use the drop-down to change the Refclk (MHz) to 156.250. Keep defaults for
other fields
X-Ref Target - Figure 1-24
VC7203 IBERT Getting Started Guide
UG847 (Vivado Design Suite v2015.1) April 27, 2015
(Figure 1-24).
Figure 1-24: Customize IP - Protocol Definition
www.xilinx.com
Chapter 1: VC7203 IBERT Getting Started Guide
30
Send Feedback