Xilinx Virtex-7 FPGA VC7203 Getting Started Manual page 19

3. The Vivado tool now shows the SuperClock-2 VIO core and the IBERT core. To configure
the SuperClock-2 module, select Tools > Run Tcl Script
Script window, navigate to the setup_scm2_156_25.tcl script in the extracted files
and click OK.
X-Ref Target - Figure 1-15
VC7203 IBERT Getting Started Guide
UG847 (Vivado Design Suite v2015.1) April 27, 2015
Chapter 1: VC7203 IBERT Getting Started Guide
Figure 1-15: Run Tcl Script
www.xilinx.com
(Figure 1-15). In the following Run
Send Feedback
19