Xilinx Virtex-7 FPGA VC7203 Getting Started Manual page 16

5. In the Select Hardware Target window, the xilinx_tcf cable appears under Hardware
Targets, and the JTAG chain contents of the selected cable appear under Hardware
Devices (Figure
the default value (15 MHz). Click Next.
X-Ref Target - Figure 1-12
6. In the Open Hardware Target Summary window, click Finish. The wizard closes and the
Vivado tool opens the hardware target.
VC7203 IBERT Getting Started Guide
UG847 (Vivado Design Suite v2015.1) April 27, 2015
1-12). Select the xilinx_tcf target and keep the JTAG Clock Frequency at
Figure 1-12: Select Hardware Target
www.xilinx.com
Chapter 1: VC7203 IBERT Getting Started Guide
16
Send Feedback