C-Brace Setup" Adjustment App; System Requirements; Starting The Adjustment App - Otto Bock 17KO1 Series Instructions For Use Manual

"C-Brace Setup" adjustment app

8 "C-Brace Setup" adjustment app
The "C-Brace Setup" adjustment app makes it possible to optimise the product settings for
a patient. The adjustment app provides step-by-step guidance through the adjustment pro­
cess. After the settings are configured, the settings data can be exported in PDF format.
The adjustment app is also used for configuration of the Cockpit app.
INFORMATION
Demo mode of the adjustment app
A demo mode can be started by tapping the "Start demo mode" button in the bottom right corner of the screen.
This mode makes it possible to demonstrate the functionality of the adjustment app without a connection to a com­
ponent. The information "Demo mode active" is displayed in the status bar at the bottom while the demo more is
active.
Tap the "End demo mode" button to exit demo mode.

8.1 System requirements

The functioning of the "C-Brace Setup" adjustment app is assured on the following mobile devices and operating
systems:
iOS (Apple)
• iPad (3rd generation or higher) / iPad mini (all versions) / iPad Air (all versions) / iPad Pro (all versions)
• iOS 9.3 or higher
Android
• Samsung Galaxy Tab A SM-T58x
• Android 7.0

8.2 Starting the adjustment app

Initial login
1) Tap the "C-Brace Setup" ( ) symbol.
→ The end user licence agreement (EULA) is displayed.
2) Accept the end user licence agreement (EULA) by tapping the "Accept" button. If the end user licence agree­
ment (EULA) is not accepted, the adjustment app cannot be used.
→ The login screen is displayed.
3) Enter the relevant information that was provided during the Ottobock product training course for the adjustment
app in the "User name" and "Unlock-PIN" fields.
INFORMATION: The use of uppercase and lowercase letters must be observed for the input.
4) Tap the "Log in" button.
→ The screen to enter the password is displayed.
5) Enter and confirm a password of your choice. This password replaces the unlock PIN at the next login. Enter­
ing the password is required for the login.
INFORMATION: This password entry window only appears after entering the unlock PIN. When a
password has already been entered during the login, the password entry screen will not appear.
6) Tap the "OK" button to assign the password to the user and save it. The last 5 users who have logged in are
saved on the tablet with their username and the corresponding password. When logging in again, these users
can be chosen from a list during input of the username.
→ The "App settings" screen is displayed.
7) Tap the desired units for weight and length.
8) Tap the "OK" button to assign the selected units to the user and save the setting. The next time this user logs
in, the saved setting for the units is applied. To subsequently change the units, see the section "Changing the
units for weight and length" (see Page 25).
→ The screen for establishing the connection to the component appears.
9) See the next section for establishing a connection to the component.
24 C-Brace joint unit 17KO1=*