Cockpit App Navigation Menu; Managing Components; Adding Component - Otto Bock 17KO1 Series Instructions For Use Manual

Cockpit app

9.3.1 Cockpit app navigation menu

Product
MyModes
2. Training mode
Settings
Status
4. User defined
General
Manage components
Imprint/Info

9.4 Managing components

Connections with up to four different components can be stored in the app. However, a component can only be
connected to one device at a time.
The following points need to be observed before establishing the connection:
INFORMATION
If establishing a connection to a component is not possible, perform the following steps:
► Delete the component from the Cockpit app if applicable (see the section "Deleting a component").
► If present, delete the component from the Bluetooth settings on the device (unpair).
► Rest the component by connecting and disconnecting the battery charger.
► Add the component again in the Cockpit app (see the section "Adding a component").
• Bluetooth of the component must be switched on (see Page 42).
• Bluetooth on the mobile device must be switched on.
• The device must not be in "flight mode" (offline mode), otherwise all wireless connections are turned off.
The device must be connected to the internet.
•
• The serial number and Bluetooth PIN of the component being connected must be known. They are found on
the enclosed Bluetooth PIN card. The serial number begins with the letters "SN".
INFORMATION
If the Bluetooth PIN card with the Bluetooth PIN and serial number of the component is lost, the Bluetooth PIN for
an already connected component can be determined using the adjustment app. If the Bluetooth PIN is needed
even to start the adjustment app, please contact an authorised Ottobock service centre. The serial number must
be provided so a new card can be issued.

9.4.1 Adding component

1) Tap the symbol in the main menu.
→ The navigation menu opens.
2) In the navigation menu, tap the entry "Manage components".
3) Briefly press the button on the control panel of the joint unit to activate recognition (visibility) of the Bluetooth
connection for 2 minutes.
34
Tap the symbol in the menus to display the navigation menu. Additional
settings for the connected component can be configured in this menu.
Product
Name of the connected component
change
MyModes
Return to the main menu to switch MyModes
Settings
Change settings of the currently selected mode (see Page 39)
Status
Query status of the connected component (see Page 42)
Manage components
Add or delete components (see Page 34)
Imprint/Info
Display information/legal notice for the Cockpit app and the connected
component
C-Brace joint unit 17KO1=*