Komatsu D475A-5E0 Operation & Maintenance Manual page 99

EXPLANATION OF COMPONENTS EXPLANATION OF COMPONENTS
Dual tilt operation
Operate the tilt switch (1) to the (D) position.
(A) RIGHT TILT
(B) LEFT TILT
REMARK
With the dual tilt operation, a larger amount of tilt can be
obtained than with the single tilt operation.
With the tilt operation, the blade can be operated to RAISE,
HOLD, or LOWER.
Pitch control
Rear pitch (R)(cutting angle reduced)
Perform operation (B) with the pitch button (2) pressed.
Forward pitch (F)(cutting angle increased)
Perform operation (A) with the pitch button (2) pressed.
REMARK
With the pitch operation, the blade can be operated to any of
RAISE, HOLD, or LOWER.
For details of the effective use of the dual tiltdozer, see
"EFFECTIVE METHOD OF OPERATION FOR DUAL
TILTDOZER (PAGE 6-13)".
To operate the pitch, keep the pitch button pressed and operate
the blade control lever to the left or right to start the operation.
The pitch is the priority circuit, so if the pitch button is pressed
during tilt operation, the pitch will be actuated.
3 - 46
OPERATION OPERATION